| Author |
Topic: Mod Reverb |
Jack Hargraves
From:
Missouri, USA
|
Posted 25 Apr 2020 10:24 am |
|
I just got my new Mod reverb in yesterday, and installed it in my Nashville 112 immediately. What a difference it made.
I now have the reverb sound I wanted all along. Ir reminds me of the sound I had in the 60s.
_________________
GFI Expo SD10, Nashville 112, Steelers choice Pak-a- seat, Carter vol. pedal, Stage one vol. pedal, Peavey Deltafex. Goodrich volume pedal. |
|
|
 |
Tommy Boswell
From:
Virginia, USA
|
Posted 25 Apr 2020 11:25 am
|
|
| I had the same experience putting one into a Special 130. Mod makes a great-sounding reverb tank. |
|
|
|
Don Mogle
From:
Round Rock, TX, USA
|
Posted 25 Apr 2020 1:22 pm MOD Tanks
|
|
| Can you buy these for a Peavey Deuce or Artist? |
|
|
|
Ron Funk
From:
Ballwin, Missouri
|
Posted 25 Apr 2020 4:32 pm
|
|
Could you fellahs provide further info on the "Mod reverb" for the NV112 that you refer to?
Is it simply a replacement reverb tank?
Thanks |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 26 Apr 2020 4:17 am
|
|
https://bb.steelguitarforum.com/viewtopic.php?t=348363&highlight=mod+reverb+tank
Some info re: MOD reverb tanks. Don, if you pull your old existing reverb pan, it should have a number on it such as listed in the above link. You can match up the number for a new MOD brand tank.
Otherwise, Ken Fox may know which tank fits the Artist/Deuce.
I don't know if it was the reverb unit itself or the circuitry, but the Artist I had left a lot to be desired in the reverb department. Too bad, 'cause I really liked it for guitar otherwise. |
|
|
|
Don Mogle
From:
Round Rock, TX, USA
|
Posted 26 Apr 2020 5:24 am
|
|
| THANKS! |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 26 Apr 2020 6:21 am
|
|
| A bit off topic but for those of you who might want to shorten the "tail" of the spring reverb that you have you can do that by inserting a small piece of foam between the pan and the spring. The placement along the spring determines the length of the "tail". |
|
|
|
Robert W Wilson
From:
Palisade, Western Colorado
|
Posted 26 Apr 2020 7:11 am The tank you want
|
|
| Ron Funk wrote: |
Could you fellahs provide further info on the "Mod reverb" for the NV112 that you refer to?
Is it simply a replacement reverb tank?
Thanks |
I put this 3 spring MOD tank (vs 2 OEM) in a late model NV112. The improvement is dramatic. The original verb is okay, engaging it thins the tone. Install this and in 5 min you will have a luxurious sounding verb that will bring a smile. Absolutely the best $30 I’ve spent, it would be a deal even at $130.
 [/img] |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 26 Apr 2020 7:28 am
|
|
| I have a used (works like a new one) that I can sell. PM me. |
|
|
|
Michael Brebes
From:
Northridge CA
|
Posted 26 Apr 2020 9:11 am
|
|
I am pretty sure that Amplified Parts is the same as Antique Electronics, so you can buy them from either website.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso
Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100 |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 26 Apr 2020 10:14 am
|
|
Their web site is "tubesandmore.com"
Several different names. |
|
|
|
Jack Hargraves
From:
Missouri, USA
|
Posted 14 May 2020 2:03 pm
|
|
Ron, it's a simple swap out. Unplug the two RCA cables and install the new one, hook up the cables and you're in business. You can just type in Mod reverb on your computer and find the one for your NV112.I got my through Amazon.
_________________
GFI Expo SD10, Nashville 112, Steelers choice Pak-a- seat, Carter vol. pedal, Stage one vol. pedal, Peavey Deltafex. Goodrich volume pedal. |
|
|
|
Mike Schwartzman
From:
Maryland, USA
|
Posted 14 May 2020 6:26 pm
|
|
My experience seems to be the same as the others here... and in tube amps also. I don't know what's up with modern tanks made by Accutronics, but putting the MOD tanks in seems to improve the reverb in the amps I've tried them in. That even includes a '63 reissue Fender standalone reverb unit.
_________________
Emmons Push Pull, BMI, Session 400, Home of the Slimcaster Tele. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 15 May 2020 4:10 am
|
|
| Same tank for Artist or most all Peavey amps |
|
|
|
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 15 May 2020 8:01 am Mod tank
|
|
| To my ears, the MOD tank is a huge improvement over the accutronics, better build, and better sound. Great upgrade for the price. |
|
|
|
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 15 May 2020 8:02 am Oops, double post..
|
|
+1
Last edited by Steve Spitz on 21 May 2020 12:59 pm; edited 1 time in total |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 20 May 2020 8:46 am mod reverb
|
|
put a mod 3 spring in my nv1000 2 to 3 months ago never used it but a few time didnt like it changed 2 a 2 spring now the 3 spring is lying in my musis room,
_________________
Mike Bowles |
|
|
|
