| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic 1973 Sho-Bud Pro II from the estate of Roy Clark
Goto page 1, 2  Next
Reply to topic

Should I try to fix the pedal and lever slowness or pay to have it repaired
Fix it yourself
13%
 13%  [ 5 ]
Pay for repair
68%
 68%  [ 26 ]
Sell guitar to highest bidder
5%
 5%  [ 2 ]
Abandon it along with most of my material things, and live in a van down by the river.
13%
 13%  [ 5 ]
Total Votes : 38

Author Topic:  1973 Sho-Bud Pro II from the estate of Roy Clark
Andrew Szumowski


From:
Michigan, USA
Post  Posted 20 Apr 2020 8:03 pm    
Reply with quote

Hi everyone, I just purchased a 1973 Sho-Bud Pro II with almost no smoke or cosmetic damage. 8 pedals, 6 knee levers. It was obtained from the estate of Roy Clark, and I'm wondering if anyone has any info on who may have played this particular instrument.

Apologies for ignorance and lack of term knowledge; this is my first post and it's almost as intimidating as trying to play this beauty. So, without further ado: I am having several issues.

A) the A, B, C pedals and some knee levers are partially or totally stuck, or not returning all the way. Is using a T9 bike chain lubricant a good way to lube the mechanism and fingers, etc? Btw, the C6 pedals (called 4, 5, 6, 7, 8 in this case?) seem to be working, but I'm not sure what the recommended copedent is for the C6 guitar on this particular 10 string Sho-Bud.

B) Roy left a handwritten tuning chart on a piece of paper in the case for this Sho-Bud. (I know he wasn't primarily, or even really ever, a steel player). The lower guitar is set up for C6, but the upper guitar is setup for C9th. It is literally a Standard E9th tuning, just dropped down two whole steps. The string gauges are accordingly heavier to account for the higher tension on lower tuning. I obviously want to bring the guitar back to having E9th tuning, and have ordered a set of strings. Will adjusting these strings and tuning help solve the sticky pedal/lever issues?

C) copedent for the E9th (currently C9th) guitar is almost impossible to verify with the A, B, and C pedals not returning, and some knee levers not functioning correctly. Troubleshooting needed, the pickups are rocking and she sounds gorgeous just playing open chords and lap steel stuff, but I need to move forward with restoring her to her glory.

Thank you all for taking the time to read this. - Andrew Szumowski 4/20/20


Last edited by Andrew Szumowski on 21 Apr 2020 8:00 am; edited 1 time in total
View user's profile Send private message Send e-mail Visit poster's website
John Goux

 

From:
California, USA
Post  Posted 20 Apr 2020 10:20 pm    
Reply with quote

Nice find. Enjoy the project. I’d be honored to have Roy’s steel.
John
View user's profile Send private message Send e-mail
Greg Milton


From:
Benalla, Australia
Post  Posted 20 Apr 2020 11:29 pm    
Reply with quote

This is apparently a rare find - a Pro II in great cosmetic condition, and Ricky Davis' favourite Sho-Bud - see https://steelguitarforum.com/Forum5/HTML/008026.html and https://steelguitarforum.com/Forum5/HTML/005157.html

Definitely keep it and if you can't take it apart and clean it up yourself then pay someone to do it for you! It's got 6 knee levers too!
View user's profile Send private message Send e-mail
Jon Light


From:
Saugerties, NY
Post  Posted 21 Apr 2020 2:51 am    
Reply with quote

Welcome.
If everything is so sluggish, then the problem is (most likely) that the changer is gummed up. Oil could be tried on one or two spots but for something as comprehensive as your condition it would be using too much oil and you would have a bad mess (that would attract dirt and would only get worse). It really needs a cleaning and that would involve at least a good flushing with something like naphtha if not removal of the changer and a dunk in a dip tank and that requires proper facilities (garage, bucket, etc.).

Changing strings will have no bearing on this condition.

Just for your learning the terminology, the lower neck is called the rear neck, the upper is the front.

With a few of photos of the underside we could identify the setup of the E9 neck.

And I'd love to see photos of the whole guitar because....because.

Cool!
View user's profile Send private message Send e-mail Visit poster's website
Pat Moore


From:
Virginia USA
Post  Posted 21 Apr 2020 3:55 am    
Reply with quote

Get 'er redone by Ricky Davis. Too special to do guesswork on a guitar owned by
ROY CLARK! Whoa!
View user's profile Send private message Send e-mail
Ricky Davis


From:
Bertram, Texas USA
Post  Posted 21 Apr 2020 6:09 am    
Reply with quote

OK Speaking of Roy Clark. We were fortunate to have Roy Clark announce us at one of the Last Live TV Grand Ole Opry Shows Here's the video>
https://youtu.be/GBYcZJqU56Q
When I was there that time; that was the first thing Roy did was run up to me when he saw my Sho~Bud Pro II and said: "Ricky; you have the best sounding Steel Guitar and I happen to have one like it, because of the sound".
I never got a chance to see Roy's Sho~bud; but we talked Sho~bud for at least 30 minutes and his passion for Sho~Bud Pedal Steel goes as far as almost anyone I met.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com
View user's profile Send private message Send e-mail Visit poster's website
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 6:11 am    
Reply with quote

View user's profile Send private message Send e-mail Visit poster's website
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 6:14 am    
Reply with quote

View user's profile Send private message Send e-mail Visit poster's website
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 6:14 am    
Reply with quote

View user's profile Send private message Send e-mail Visit poster's website
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 6:15 am    
Reply with quote

View user's profile Send private message Send e-mail Visit poster's website
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 6:16 am    
Reply with quote

View user's profile Send private message Send e-mail Visit poster's website
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 6:19 am    
Reply with quote

Ricky Davis wrote:
OK Speaking of Roy Clark. We were fortunate to have Roy Clark announce us at one of the Last Live TV Grand Ole Opry Shows Here's the video>
https://youtu.be/GBYcZJqU56Q
When I was there that time; that was the first thing Roy did was run up to me when he saw my Sho~Bud Pro II and said: "Ricky; you have the best sounding Steel Guitar and I happen to have one like it, because of the sound".
I never got a chance to see Roy's Sho~bud; but we talked Sho~bud for at least 30 minutes and his passion for Sho~Bud Pedal Steel goes as far as almost anyone I met.
Ricky


That is incredible! Any other memories or info on your time with Roy, or y'alls conversation, or his insight into this axe or yours, is a blessing! Feel free to send me a private message and we can exchange info, but I'm sure everyone on here would love to read more! Thank you Mr. Davis!!!!!!
View user's profile Send private message Send e-mail Visit poster's website
Skip Edwards

 

From:
LA,CA
Post  Posted 21 Apr 2020 7:10 am    
Reply with quote

Very cool...
View user's profile Send private message Send e-mail
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 8:15 am     1973 Sho-Bud Pro II from the estate of Roy Clark
Reply with quote

Mr. Light, what is the best way to disassemble and clean this Sho-Bud? I've got some time.... I just need extremely detailed instructions hahaha

Jon Light wrote:
Welcome.
If everything is so sluggish, then the problem is (most likely) that the changer is gummed up. Oil could be tried on one or two spots but for something as comprehensive as your condition it would be using too much oil and you would have a bad mess (that would attract dirt and would only get worse). It really needs a cleaning and that would involve at least a good flushing with something like naphtha if not removal of the changer and a dunk in a dip tank and that requires proper facilities (garage, bucket, etc.).

Changing strings will have no bearing on this condition.

Just for your learning the terminology, the lower neck is called the rear neck, the upper is the front.

With a few of photos of the underside we could identify the setup of the E9 neck.

And I'd love to see photos of the whole guitar because....because.

Cool!
View user's profile Send private message Send e-mail Visit poster's website
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 8:16 am    
Reply with quote

View user's profile Send private message Send e-mail Visit poster's website
Daymon LaPoint


From:
Jasper, Texas
Post  Posted 21 Apr 2020 8:30 am    
Reply with quote

Or. You could sell it to ME and then go live in a van down by the river. Laughing

Incredible guitar with a great story.
_________________
Steel Learnin'

'66 Emmons Bolt-On, Sho-Bud LDG, Sho-Bud Fingertip, Rus-Ler D-10, '70 Emmons, P2P Bad Dawg, Fender '59 Bassman, Fender Twin Reverb and Rick Johnson Cabinets. Evans 300 Hybrid, Evans SE-100, Evans FET500, Previous and Proud previous owner of James Blonde, Brownie, and Rosalee.
View user's profile Send private message Send e-mail
Jon Light


From:
Saugerties, NY
Post  Posted 21 Apr 2020 8:33 am    
Reply with quote

Andrew -- I'm pretty good underneath a steel but I have never (yet) pulled a changer and there is no way I will attempt to guide you.
I assume that if you are wanting to get your hands on it it means that you have confidence in your mechanical ability and pretty much I can confirm that what you see is what you have there. BUT -- I cannot recommend that you go for such a radical disassembly, not having a strong familiarity with the anatomy of a steel guitar.
If you do go ahead, you will need someone better than me as a guide.
View user's profile Send private message Send e-mail Visit poster's website
Gene Tani


From:
Pac NW
Post  Posted 21 Apr 2020 8:54 am    
Reply with quote

As a first step to understanding what you got, get/build a stable workstand for it and start wiggling the pedals and levers to see how it works.

B0b Lee sells a nice one "ACCESSORIES" link on top rigt of page but is not able to operate his shop now because all businesses are restricted where he is.

https://bb.steelguitarforum.com/viewtopic.php?t=205738
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
View user's profile Send private message Send e-mail
Barry Blackwood


Post  Posted 21 Apr 2020 9:09 am    
Reply with quote

IMO, this guitar has provenance and is worth reconditioning. I suggest part of your E9 problem is that you need a proper set of strings tuned to the correct pitch. This will provide the tension to help your pedals work.as they should. Smile
View user's profile Send private message Send e-mail
Marco Schouten


From:
Amsterdam, The Netherlands
Post  Posted 21 Apr 2020 9:53 am    
Reply with quote

It looks pretty clean, you may not need to take it apart. Maybe some solvent in the changer followed by a thin lubricant.
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo
View user's profile Send private message Send e-mail
Gene Tani


From:
Pac NW
Post  Posted 21 Apr 2020 10:13 am     the poll
Reply with quote

To answer poll question:

Keep buying historically significant instruments until you have enough for a museum!
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
View user's profile Send private message Send e-mail
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 11:06 am    
Reply with quote

Thanks Mr. Schouten. Best hardware store or auto store available solvent? Would I drip this onto the fingers, after removing the strings?

What are the best brands, and methods, for all stages of cleaning? I'll obviously try cleaning it, and putting an E9th string set on, before taking anything apart.


Marco Schouten wrote:
It looks pretty clean, you may not need to take it apart. Maybe some solvent in the changer followed by a thin lubricant.
View user's profile Send private message Send e-mail Visit poster's website
Andrew Szumowski


From:
Michigan, USA
Post  Posted 21 Apr 2020 11:09 am    
Reply with quote

Mr. Davis, how would I go about cleaning this at home? It doesn't seem very greased up, I just need instruction.

Ricky Davis wrote:
OK Speaking of Roy Clark. We were fortunate to have Roy Clark announce us at one of the Last Live TV Grand Ole Opry Shows Here's the video>
https://youtu.be/GBYcZJqU56Q
When I was there that time; that was the first thing Roy did was run up to me when he saw my Sho~Bud Pro II and said: "Ricky; you have the best sounding Steel Guitar and I happen to have one like it, because of the sound".
I never got a chance to see Roy's Sho~bud; but we talked Sho~bud for at least 30 minutes and his passion for Sho~Bud Pedal Steel goes as far as almost anyone I met.
Ricky
View user's profile Send private message Send e-mail Visit poster's website
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 21 Apr 2020 12:15 pm    
Reply with quote

That guitar looks remarkably clean for it's age, and I see no reason to tear it down. Just give it a light oiling, leave it sit for a day or two, and then play it! Cool
View user's profile Send private message Send e-mail
Ricky Davis


From:
Bertram, Texas USA
Post  Posted 21 Apr 2020 12:19 pm    
Reply with quote

Andrew; this is what I do for a living> "Sho~bud pedal steel guitar Restoration". Like I tell my customers..."I can take every single part off a D-10 Steel in 30 minutes; but It takes 3 months to put it back together...ha..
That means Every single part comes off and gets what ever it needs to restore it back to original or new part made in the original way. For me to tell you what to do and how to do it....would Shut down this whole website with Data overload...ha....but fortunately you are in luck. At the top where you sign in; there is a "Search" button....click it and then select "Google Search" then you can type in: "ricky davis cleaning shobud changer" or "Ricky Davis taking out changer" or "ricky davis pickin his nose"..ha....ha...so you can get a million things I've posted through the years; including the most famous Lloyd Green "lightening bolt" fingertip that is in the Country Music Hall of Fame Museum in Nashville; that I restored> here's a pic and here's a pic Lloyd Looking at it...(his back to us.).


Good Luck.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron