MCI knee lever adjustment

Larry Phleger · From: DuBois, PA

I have an MCI D10. I need to adjust the angle of the knee levers, but can't determine the specs on the adjustment screws. Can anyone please tell me the size and type of these screws? Your help will be greatly appreciated. Thanks in advance
Larry

Brian Hollands · From: Geneva, FL USA

Mine use .030 allen (hex) wrench on the knee lever itself. It's an EMCI...
_________________
'81 Sho-bud LDG, 2 EMCI's

Jerry Overstreet · From: Louisville Ky

Do you have a photo? There were several different versions of MCI kl's and adjustment screws through the years. Most of mine had a set screw type socket head screw and a tiny lock nut. I cannot remember the size of the allen wrench though.

Some others had a phillips head screw and they were just about all different sizes.

The foreground is a vertical with the phillips head. Hard to see, but the closest to that is the socket head with the lock nut. Ha

Joel Jackson · From: Detroit

Allen size for adjusting knee levers on my MCI D10 is .050

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: