| Author |
Topic: 3rd batch of Pedal Steel Workstands |
b0b
From:
Cloverdale, CA, USA
|
Posted 9 Aug 2018 2:57 pm |
|
The SGF Pedal Steel Workstands are back in stock. Designed by Ross Shafer (of Sierra fame) exclusively for The Steel Guitar Forum, it can be adjusted to fit almost any single- or double-neck pedal steel. You need one of these whenever you have to turn your guitar upside down to fix or change something. Handy and portable. $125.
<center>
https://www.steelguitarshopper.com/pedal-steel-workstand/
</center>
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
 |
b0b
From:
Cloverdale, CA, USA
|
|
|
|
b0b
From:
Cloverdale, CA, USA
|
|
|
|
Al Evans
From:
Austin, Texas, USA
|
Posted 16 Oct 2018 5:11 am
|
|
Your workspace is a lot neater than mine, but I just used my workstand to do a bunch of stuff to my MSA D10 Classic. It was great to have the possibility of adding and altering changes and plucking the strings immediately to test the result!
--Al Evans
_________________
2018 MSA Legend, 2018 ZumSteel Encore, 2015 Mullen G2, G&L S-500, G&L ASAT, G&L LB-100, Godin A4 Fretless, Kinscherff High Noon |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 8 Nov 2018 5:45 pm
|
|
Nice photo, Al. I've been using the stand to work on two S-10s lately - a Marlen pull-release and a Sho~Bud Pro I.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
Michael Maddex
From:
Northern New Mexico, USA
|
Posted 25 Nov 2018 9:50 am
|
|
I recently bought one of these Workstands from b0b to work on my Fender 400. The Fender is a heavy guitar and this stand holds it up just fine. My back and eyes are not what they used to be, so getting my work held solidly and at a comfortable height is always a big help. I have a Keyboard X-stand below the Workstand to support it.
Recommended! 
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke |
|
|
|
Al Evans
From:
Austin, Texas, USA
|
Posted 4 Dec 2018 5:00 pm
|
|
I just used my Workstand again today, to install another pull on my Zumsteel Encore (thanks, Doug!). This is a smallish single-neck, as compared to my old MSA Classic D10 shown in a picture above, which is a large double-neck. After a quick size adjustment, it worked just as well.
These things are the bee's knees! Being able to test pedals and tuning as you go totally rocks! If you EVER work on a pedal steel, you should get one!
--Al Evans
_________________
2018 MSA Legend, 2018 ZumSteel Encore, 2015 Mullen G2, G&L S-500, G&L ASAT, G&L LB-100, Godin A4 Fretless, Kinscherff High Noon |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 23 Jan 2019 12:30 am
|
|
I just used mine a few days ago to adjust my verticals great little stand.
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Bob Hoffnar
From:
Austin, Tx
|
Posted 23 Jan 2019 12:44 pm
|
|
I'm super happy with my stand. It makes things easy.
_________________
Bob |
|
|
|
Ross Shafer
From:
Petaluma, California
|
Posted 24 Jan 2019 7:22 am
|
|
| I will have a few stands on hand for sale at the upcoming Dallas shindig. Come by the Sierra table, say hi, test drive a new Sierra and buy yourself a workstand! |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
|
|
|
Len Amaral
From:
Rehoboth,MA 02769
|
Posted 20 May 2019 11:58 am
|
|
Great item. It will last a lifetime and makes working on your steel easy. Also,
the tray in front is nice to put allen wrenches and small parts.
_________________
I survived the sixties! |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
|
|
|
Randy Lefebvre
From:
Lakeworth, Florida, USA
|
Posted 29 Jan 2020 12:39 pm work bench
|
|
Hey Bob,
Just found this. If this still available I would love to have one. Followed the link which showed a 404 error. Please let me know and how to direct payment.
Thanks Randy
_________________
Randy Lefebvre
Emmons Lashley Legrande
Sho-Bud Super Pro
Sho-bud Pro II Custom,
Peavey Nashville 400
Peavey Nashville 400
Peavey 112 |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 29 Jan 2020 5:12 pm
|
|
They are out of stock right now, Randy. We're working on another batch. Probably a couple of months out. Sorry about the broken link.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
Randy Lefebvre
From:
Lakeworth, Florida, USA
|
Posted 29 Jan 2020 8:19 pm work bench
|
|
Bob thanks for the reply. Please let me know when they arrive. If there is a list please place me on it. thanks
_________________
Randy Lefebvre
Emmons Lashley Legrande
Sho-Bud Super Pro
Sho-bud Pro II Custom,
Peavey Nashville 400
Peavey Nashville 400
Peavey 112 |
|
|
|
MIchael Bean
From:
North Of Boston
|
Posted 26 Mar 2020 9:18 am
|
|
I love this thing. I used to loathe working on my steel, now I really enjoy it. I've been experimenting with the copedent of my Mullen PRP U12. The contact points where the body meets the stand are wider by the headstock than in the middle, so the supporting walls can be can be set at different distances from each other. It works beautifully.
 |
|
|
|
