| Author |
Topic: Telonics Volume Pedal Power Supply |
Mike Brinkmeyer
From:
Houston, Texas
|
Posted 13 Mar 2020 2:03 pm |
|
| Is there a good after market power supply (US) that will work with a Telonics FP-100 volume pedal? Don’t really want to spend $30 for the Telonics one. |
|
|
 |
Dave Diehl
From:
Mechanicsville, MD, USA
|
Posted 13 Mar 2020 2:35 pm
|
|
| Don't know the answer to your question Mike but think about it for a moment.... (not trying to be smart here) Telonics will work with you should something go wrong with the PS you buy from them. Who would you call with an aftermarket PS. |
|
|
|
Jeff Garden
From:
Center Sandwich, New Hampshire, USA
|
Posted 13 Mar 2020 3:06 pm
|
|
I agree with Dave, Mike. If you have a $500 pedal I don't think $30 for a power supply is excessive. Dave Beatty is a perfectionist and he and the gang at Telonics put a lot of effort into matching their power supply with the pedal (no 50-60 Hz AC hum etc).
All of their products are exceptional and their customer service is second to none. |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 13 Mar 2020 3:43 pm
|
|
What you're calling a Telonics unit is also the one supplied with a Hilton. It's made by Phihong and at $30 is not expensive as it guarantees the performance of your pedal.
If you don't want to buy Chinese I'm not sure what your next step would be.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
