William Gallagher
From:
California, USA
|
Posted 2 May 2020 2:47 pm |
|
Includes plug in for a 9-volt negative tip regulated power supply and may also be powered by one 9-volt battery (included). Designed for using a pot volume pedal with a steel guitar. This is an updated, and improved, version designed to improve the tone-frequency response of traditional pot volume pedals.
From Hilton site: The tone-frequency response of a pot pedal is not the same at low levels as it is at higher volume levels. The capacitance in an old pot pedal robs the high-end frequency out of a guitar’s pickup signal. Therefore, when using an old pot volume pedal your sound is better, or worse, at lower or higher volumes. With the Signal Sweetener Pro-sound II, your pickup becomes more alive, and the frequency response more consistent. It gives your guitar a much broader, and more transparent frequency range. Guitar notes become much clearer, and more defined, especially at the higher frets. When playing chords, you will hear more string separation. The Pro Sound II allows you to keep your old pot pedal, and still have all the high fidelity of the electronic volume pedals.
_________________
'75 Emmons p/p, Duesenberg Alamo, Dobro with Hipshot, Nashville 112, Little Walter 22/50, Fender Blues Deluxe, and enough effects gear to fill a dump truck. |
|
