Zum Dimensions please

Kevin Hatton · From: Buffalo, N.Y.

Would one of the ZUM owners please help me here. LM English oredered a set of cases ZUM. LM took a heart attack and is recovering from bypass surgery. I need dimensions for a ZUM so that I can get him his cases. I need length end plate to end plate, and width end plate to end plate. Also height from the top of the deck to the top of the tuning key. Also height of the face of the guitar. Thanks.

chris ivey · From: california (deceased)

tommy detamore made me a beautiful road case for my zum...look up his e-mail or bruce zumsteg's , i'm sure they've got the dimensions and both are great guys.

Marc Mercer · From: Colorado, USA

Kevin, my D10 looks like:

33 3/16" long, endplate to endplate

11" wide, endplate to endplate

Top of the deck to the top of the keys is 1 9/16", but I don't understand what you mean by "height of the face."

Jerry Roller · From: Van Buren, Arkansas USA

I believe the front apron is 1/4" taller than an Emmons which would make it 3 1/2". I think Bruce still angles the endplate from the leg sockets which adds a little more overall thickness to the guitar so it might be close to 3 3/4" from the top deck to the bottom of the endplate then add the height of the changer pillars or actually the height of the keys for the overall thickness of the guitar.
Jerry

[This message was edited by Jerry Roller on 27 October 2006 at 10:42 PM.]

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: