| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Best way to repair a punctured speaker cone?
Goto page 1, 2  Next
Reply to topic
Author Topic:  Best way to repair a punctured speaker cone?
Matthew Walton


From:
Fort Worth, Texas
Post  Posted 27 Jan 2020 12:18 pm    
Reply with quote

Hi all,

What is the best way to repair a speaker cone? I have an amp that I'm trying to sell, but I noticed a fairly small puncture in the cone (see picture).

I've read something (I think on this forum) about soaking a coffee filter or paper towel in wood glue to act as a sort of patch. Is that still the best way or is there something better to do?



Thanks!
_________________
If something I wrote can be interpreted two ways, and one of the ways makes you sad or angry, I meant the other one.

1981 MSA "The Universal" Bb6 S-12 9/5 | 2024 Excel Robostar Bb6 S-12 8/5 | 2009 MSA SuperSlide C6 S-12 | Peavey Nashville 112
View user's profile Send private message Send e-mail Visit poster's website
Larry Dering


From:
Missouri, USA
Post  Posted 27 Jan 2020 12:37 pm    
Reply with quote

I repaired a couple by using wood glue and a paper towel single ply. Do both sides. Afterwards sprayed with flat black paint. Check out some YouTube videos on the subject.
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 27 Jan 2020 1:11 pm    
Reply with quote

Glue and tissue will certainly work.. Personally, I use black RTV silicone.. Plain old black auto repair stuff.. Smooth the original paper back in shape as best you can, and apply the black RTV over the tear.... let it sit a day.. It will never break around that spot again, and the speaker will sound as good as it ever did,, Over many decades, I have used black RTV on speaker rips and tears, and its always worked perfectly for me... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Jerry Overstreet


From:
Louisville Ky
Post  Posted 27 Jan 2020 1:28 pm    
Reply with quote

Same as Bob C. Here's a shot of one I repaired with RTV. A dumb move trying to pick it up by the rim and it rolled around on my knuckles due to the weight.

I repaired it with RTV and it sounds fine. It's been like this for 5 or 6 years and I can't hear any difference. I didn't bother to paint over it. Unsightly yeah, but my concern is with the sound.

View user's profile Send private message
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 27 Jan 2020 2:19 pm    
Reply with quote

That rip in the speaker will certainly decrease the value of the amp.
I don't know what amp you are trying to sell but if it is a valuable amp I would suggest you recone the speaker.
Erv
View user's profile Send private message Send e-mail
Fred


From:
Amesbury, MA
Post  Posted 27 Jan 2020 2:29 pm    
Reply with quote

If you can smooth it out so it’s closed up a little bit of clear nail polish will seal it. Saturate the paper and wipe off the excess.

Fred
View user's profile Send private message Send e-mail
Matthew Walton


From:
Fort Worth, Texas
Post  Posted 27 Jan 2020 2:39 pm    
Reply with quote

Fortunately it's not a valuable amp. It's a Yamaha DG80-112. It's pretty cool in that it has motorized pots that move to the preset positions. Somebody gave it to me because I thought I'd use it, but I never did and I just want to get rid of it.

I hope to get $400 for it, and I might be a little over-optimistic at even that price. Hopefully if I repair the cone and clean the speaker grille a little bit.
_________________
If something I wrote can be interpreted two ways, and one of the ways makes you sad or angry, I meant the other one.

1981 MSA "The Universal" Bb6 S-12 9/5 | 2024 Excel Robostar Bb6 S-12 8/5 | 2009 MSA SuperSlide C6 S-12 | Peavey Nashville 112
View user's profile Send private message Send e-mail Visit poster's website
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 27 Jan 2020 3:03 pm    
Reply with quote

What Bob said is what I've used for decades. I even repaired a 15" JBL that had the suspension ring torn almost all the way around. I coated the ring with black silicone RTV, then cut a strip of thin nylon fabric and laid it into the suspension ring, working it into the grooves with a dull pencil. Then I overcoated the repair again lightly with the RTV. I played that speaker for about another two years, and finally the voice coil blew (from playing too loud with a fuzztone). Laughing

If you can't find some black RTV, "Shoe-Goo" will work, too.
View user's profile Send private message Send e-mail
Paul Sutherland

 

From:
Placerville, California
Post  Posted 27 Jan 2020 3:27 pm    
Reply with quote

Anything you use on a speaker cone to repair damage will affect the tone. The cone will have a different weight and will not vibrate/oscillate evenly. The bigger the repair the more it won't sound the same.

I've repaired a few speaker cones and always been dissatisfied with the results.
_________________
It don't mean a thing if it ain't got that swing.
View user's profile Send private message Send e-mail
Matthew Walton


From:
Fort Worth, Texas
Post  Posted 28 Jan 2020 7:12 am    
Reply with quote

Paul Sutherland wrote:
Anything you use on a speaker cone to repair damage will affect the tone. The cone will have a different weight and will not vibrate/oscillate evenly. The bigger the repair the more it won't sound the same.

I've repaired a few speaker cones and always been dissatisfied with the results.


That's too bad. I think I'm still going to do it just because I want this amp out of my life and out of my living space, and I guess I need to put in a little more work to make this happen.
_________________
If something I wrote can be interpreted two ways, and one of the ways makes you sad or angry, I meant the other one.

1981 MSA "The Universal" Bb6 S-12 9/5 | 2024 Excel Robostar Bb6 S-12 8/5 | 2009 MSA SuperSlide C6 S-12 | Peavey Nashville 112
View user's profile Send private message Send e-mail Visit poster's website
Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 28 Jan 2020 1:49 pm    
Reply with quote

I just watched a fascinating video on recconing a JBL speaker. This fellow sells recone kits for various speakers. Very informative and entertaining.

https://www.youtube.com/watch?v=x6CCrLz-Zts
_________________
I survived the sixties!
View user's profile Send private message Send e-mail
Matthew Walton


From:
Fort Worth, Texas
Post  Posted 28 Jan 2020 2:03 pm    
Reply with quote

Very cool! I've always thought that vintage speaker and pickup repairs are one of the most practical applications of the Ship of Theseus thought experiment.
_________________
If something I wrote can be interpreted two ways, and one of the ways makes you sad or angry, I meant the other one.

1981 MSA "The Universal" Bb6 S-12 9/5 | 2024 Excel Robostar Bb6 S-12 8/5 | 2009 MSA SuperSlide C6 S-12 | Peavey Nashville 112
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 28 Jan 2020 2:13 pm    
Reply with quote

I've reconed several JBL speakers.
I just did a 15" for a Fender Vibrasonic amp. Very Happy
Erv
View user's profile Send private message Send e-mail
Thomas Stone


From:
San Francisco
Post  Posted 28 Jan 2020 2:28 pm    
Reply with quote

Like Larry Dering, I cut a patch out of a paper towel, then split it into two plies. Dilute white glue about 20%, then use an artist's brush to paint a thin layer around the hole. Apply one patch, then paint more glue over the patch. Turn the speaker over and repeat the same procedure on the other side. Let dry, then paint if desired. Have done several this way, they sounded fine and never gave any future trouble.

Last edited by Thomas Stone on 28 Jan 2020 3:41 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Jon Light


From:
Saugerties, NY
Post  Posted 28 Jan 2020 3:38 pm    
Reply with quote

I'm grateful for this thread. I was just about to do the paper & Elmers patch that I've known of for years -- first heard of it via Ted Weber and I have confidence in it. But I much prefer the idea of RTV silicone and that's what I'm going to do.

I also need to paint/dope the surround where it got very frayed and weakened when it stuck to the baffle when I pulled the speakers. I'm going to use brushable roof patching sort of stuff -- liquid rubber, I guess. I didn't just pull that idea out of thin air -- did a bit of research and found this to be a popular solution.
View user's profile Send private message Send e-mail Visit poster's website
Sandy Inglis


From:
Christchurch New Zealand
Post  Posted 30 Jan 2020 1:14 am    
Reply with quote

In my early days, I repaired some damaged speakers using ADOS contact adhesive as it remains flexible (like RTV). I never noticed any issues, but back then everything was distorted anyway!
I feel that a wood glue would stiffen up the cone and eventually cause further damage.
_________________
01'Zumsteel D10 9+9; Sho Bud D10 SuperPro; 6 String Lap Steel (Homemade); Peavey Nashville 1000; Fender Deluxe 85;
1968 Gibson SG; Taylor 710 CE; Encore Tele Copy; Peterson Tuner; HIWATT T40 C 40W/20W Combo
View user's profile Send private message Send e-mail Visit poster's website
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 30 Jan 2020 2:34 am    
Reply with quote

If anyone is afraid of the RTV/liquid rubber fix, there are a LOT of speakers out there that come new from the factory with a rubber coating of some sort right around the ridges in the speaker paper where they attach to the frame.. Soaks right into the paper, and prevents fraying over time... RTV, or some sort of brush on rubber is the most common way to repair speakers these days, and in my opinion I don't think anyone will notice deterioration in the sound.... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Stephen Cowell


From:
Round Rock, Texas, USA
Post  Posted 30 Jan 2020 11:19 am    
Reply with quote

RTV is not what they dope the edges of the speaker with... it's something (like butyrate dope!) that will soak in.

I like carpenter glue and Yellow Pages for the flat part of the cone... I tend toward more flexible solutions on the surround.

Mostly... be careful when stabbing the speaker over the bolts! And removing it, of course.
_________________
New FB Page: Lap Steel Licks And Stuff: https://www.facebook.com/groups/195394851800329
View user's profile Send private message Send e-mail
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 31 Jan 2020 7:21 am    
Reply with quote

Stephen Cowell wrote:
RTV is not what they dope the edges of the speaker with... it's something (like butyrate dope!) that will soak in.

I like carpenter glue and Yellow Pages for the flat part of the cone... I tend toward more flexible solutions on the surround.

Mostly... be careful when stabbing the speaker over the bolts! And removing it, of course.

Actually in my reply I said a "rubber coating of some sort".. never said RTV was used on new speakers. It isn't of course. However, it does work pretty well on repairs... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Matthew Walton


From:
Fort Worth, Texas
Post  Posted 1 Feb 2020 7:41 pm    
Reply with quote

Thanks for the info y'all! When you mention RTV, is there something specific I need to get, or would any ol' 100% silicone caulk do the trick?
_________________
If something I wrote can be interpreted two ways, and one of the ways makes you sad or angry, I meant the other one.

1981 MSA "The Universal" Bb6 S-12 9/5 | 2024 Excel Robostar Bb6 S-12 8/5 | 2009 MSA SuperSlide C6 S-12 | Peavey Nashville 112
View user's profile Send private message Send e-mail Visit poster's website
Jerry Overstreet


From:
Louisville Ky
Post  Posted 1 Feb 2020 8:37 pm    
Reply with quote

You can buy a 3 oz. tube of automotive grade black rtv silicone at your home center for about $5 or less.

That's what I would recommend. I use the heavier ultra black oil resistant black Permatex but that's because I use it for other things too. It's costlier and heavier and dull in color while the other one is gloss.

clickhere
View user's profile Send private message
Bob Carlucci

 

From:
Candor, New York, USA
Post  Posted 2 Feb 2020 9:09 pm    
Reply with quote

Matthew Walton wrote:
Thanks for the info y'all! When you mention RTV, is there something specific I need to get, or would any ol' 100% silicone caulk do the trick?

I would use black auto grade... bob
_________________
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
View user's profile Send private message
Tom Gorr

 

From:
Three Hills, Alberta
Post  Posted 10 Feb 2020 10:53 pm    
Reply with quote

Erv Niehaus wrote:
I've reconed several JBL speakers.
I just did a 15" for a Fender Vibrasonic amp. Very Happy
Erv


That's pretty cool. I need a coach Smile

I picked up a JBL D130F speaker with fried, possibly melted voicecoil as the speaker doesn't move back and forth.. and also has a dried out damaged and punctured cone, It was used in a homemade PA system build by the seller for his band 50 years ago, and has been sitting on a shelf in his garage for 30.

Don't really know what to do with it, or if its possible to fix. But thought if I could recone it, I might see the $20 value out of it.

Is it possible to repair? Where to buy a kit?

Is this easy enough for me to do, or should I take it to a local speaker rebuilder?
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 11 Feb 2020 8:09 am    
Reply with quote

Tom,
I get my repair kits from www.soundspeakerrepair.com
They have JBL repair kits that mimic the original JBL speakers. Very Happy
Erv
View user's profile Send private message Send e-mail
Tom Gorr

 

From:
Three Hills, Alberta
Post  Posted 11 Feb 2020 10:30 pm    
Reply with quote

Erv Niehaus wrote:
Tom,
I get my repair kits from www.soundspeakerrepair.com
They have JBL repair kits that mimic the original JBL speakers. Very Happy
Erv


Thanks.

Any thoughts on using the D130 frame to get a few more watts by using a K130 kit?

(I never saw Watt ratings on any of these)
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron