| Author |
Topic: Wheels for cases |
Roy Carroll
From:
North of a Round Rock
|
Posted 15 Jan 2020 8:26 am |
|
For those of you looking to add wheels to your caes for easier transport. Here is the place.
They have all kinds, but I recommend the W8375. Rh / Lh is the same.
It mounts flush to the outside of the case, no cutting involved and will hold up to 330 lbs.
Penn Elcom is the company. here is the link:
https://www.penn-elcom.com/default.asp?MC=01120801&LG=EN
Go get'em Boys!
_________________
Just north of the Weird place, south of Georgetown |
|
|
 |
Pete Burak
From:
Portland, OR USA
|
|
|
|
Thomas Stone
From:
San Francisco
|
Posted 15 Jan 2020 8:56 pm
|
|
| Great find, thanks! |
|
|
|
Bob Watson
From:
Champaign, Illinois, U.S.
|
Posted 15 Jan 2020 9:47 pm
|
|
| Do any of you know where I could get a heavy duty 75mm / 2.95 wheel without the housing? I haven't been able to find one without having to purchase the housing too. BTW, I did end up buying the W8375 and it worked great, but I didn't need the housing. It would be nice to have some extra replacement wheels, as these wheels do eventually where out. |
|
|
|
Dave Meis
From:
Olympic Peninsula, Washington, USA
|
Posted 16 Jan 2020 1:51 am
|
|
Bob..go to the website listed above. Scroll down to W8675, click on it, and it'll show you 'spare parts'. I listed the part number below. Hope this helps...
W8675-W/PJP/BK Black Wheel only |
|
|
|
