| Author |
Topic: Sierra Session Neck Thickness |
Brian Henry
|
Posted 18 Dec 2019 3:41 am |
|
Hi, Could someone measure the thickness of their Sierra Session neck. I need to know for a project. Many thanks.
_________________
LOOKOUT MOUNTAIN GEORGIA |
|
|
 |
Ross Shafer
From:
Petaluma, California
|
Posted 21 Dec 2019 9:04 am
|
|
| Don't have one to measure, but I'm pretty sure its 1", thick muthas fo sho! |
|
|
|
Brandon Montgomery
From:
Colorado, USA
|
Posted 24 Dec 2019 9:25 pm
|
|
For what’ it’s worth, I have a 96 and an 01 session, the 01 is an S-12 and has thicker wood than the 96 D-10, neither are as thick as the neck on the crown series, which goes all the way to the pickup lip. Neck on the D-10 is just shy of 7/8â€
including the mica, deck to the bottom of the pickup lip is about 1 7/32â€
_________________
I swear they tuned it when I bought it
Excel Superb SD-12 C6/E9
Bludotone amp works Owner and resident solder Jockey |
|
|
|
Brian Henry
|
Posted 25 Dec 2019 1:19 am
|
|
Thank you Brandon that’s good to know. Are your sierras keyless?
_________________
LOOKOUT MOUNTAIN GEORGIA |
|
|
|
Brandon Montgomery
From:
Colorado, USA
|
Posted 25 Dec 2019 8:59 am
|
|
Yessir
_________________
I swear they tuned it when I bought it
Excel Superb SD-12 C6/E9
Bludotone amp works Owner and resident solder Jockey |
|
|
|
Tony Glassman
From:
The Great Northwest
|
Posted 25 Dec 2019 9:33 am
|
|
| Keep in mind that the Sierra neck has a compound slope on it. It’s thicker and closer to the strings under the fretboard to reduce the parallax effect and thins down considerably toward the pickup. |
|
|
|
Brian Henry
|
Posted 25 Dec 2019 1:34 pm
|
|
Thank you Tony! That is good to know!
_________________
LOOKOUT MOUNTAIN GEORGIA |
|
|
|
