Patrick Huey
From:
Nacogdoches, Texas, USA
|
Posted 14 Dec 2019 8:46 am |
|
| Dustin Schrimpsher wrote: |
Thanks! ?It goes to the B! Now to figure out how all the magic rods work. Good stuff!
Thanks again.
-d |
Dustin
You will find several of the knees use a small screw head drilled into the body as their “stop†to stop knee lever travel. You will want to replace those with something like a small wood block or a screw with a much much larger diameter head as the aluminum mechanical parts bend easy thus that particular knee lever can miss hitting that screw head very easily and then instead of a 1/2 step raise or lower you wind up waaaaay off. Also you can contact Al Brisco of Steel Guitars Canada for parts. He bought out all the Carter parts when the owner died
_________________
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!! |
|
