| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Can today’s lap builds equal vintage laps tone?
Reply to topic
Author Topic:  Can today’s lap builds equal vintage laps tone?
Johnie King


From:
Tennessee, USA
Post  Posted 31 Oct 2019 5:32 am    
Reply with quote

Here you go David my table with Grandpas old iron wheels .
With a strong market for vintage laps I’m wondering if
Some new hand crafted laps equal the tone of the average vintage laps, notice I’m asking
Average vintage tone not your very rare tone too the bone high dollar lap steel with horse shoe pickups. I do see Jerry Douglas plays late model custom made laps an so dose The great Billy Roberson he’s the only guy I know that can slant a bar both ways at the same time at least it sounds like he does.
Zking hand crafted laps come get you one!
Custom wound pickups on Six string laps
Ten stingers have True Tone pickups
Professionally wired with best parts available. I will

I will have a booth at Bobby Reeds stars a steel guitar show here in Nashville.
November 14/15/16 come check these an more out.








Last edited by Johnie King on 2 Nov 2019 4:53 pm; edited 3 times in total
View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 31 Oct 2019 6:05 am    
Reply with quote

View user's profile Send private message Send e-mail
C. E. Jackson


Post  Posted 31 Oct 2019 9:18 am    
Reply with quote

Beautiful steels, Johnie. Which one is your favorite?


C. E. Jackson Smile
_________________
My Vintage Steel Guitars
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
View user's profile Send private message Send e-mail Visit poster's website
George Piburn


From:
The Land of Enchantment New Mexico
Post  Posted 31 Oct 2019 9:21 am     ZKing
Reply with quote

Everything Johnie makes is far superior to vintage quality in every aspect.

He clearly does this as a labor of love not money, as his prices are less than 1/2 of their realistic values.

GeorgeBoards
_________________
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel
View user's profile Send private message Send e-mail Visit poster's website
David Matzenik


From:
Cairns, on the Coral Sea
Post  Posted 31 Oct 2019 12:15 pm    
Reply with quote

Never mind the guitars . . .look at that table!!!!! Mr. Green

But seriously, it is such a subjective question. To my ears, I have to say yes. A vintage guitar is not a requirement.
_________________
Don't go in the water after lunch. You'll get a cramp and drown. - Mother.
View user's profile Send private message Send e-mail
Cartwright Thompson


Post  Posted 31 Oct 2019 1:39 pm    
Reply with quote

Yes, every guitar that Todd Clinesmith builds eclipses any “very rare tone too the bone high dollar lap steel”
View user's profile Send private message
David Ball


From:
North Carolina High Country
Post  Posted 31 Oct 2019 2:19 pm    
Reply with quote

We are lucky to be living in a renaissance of great instrument makers. The frequently mass produced instruments of the past are being reimagined by talented modern "boutique" crafts people. Given the advances in technology as well as the lessons that have been learned over time, I think that modern instruments can definitely have the edge over the older ones.

OK, there's a certain mojo that old instruments have (and I've been a collector of different kinds of things both musical and not for years) that you don't get with a newer instrument. I really like that mojo. But, putting that aside, there are really great instruments of all kinds being built today that have a mojo of their own due to a combination of great craftsmanship and design, attention to detail, and a tip of the hat to the past.

There's a place for both new and old. But I think that objectively speaking, it's hard to argue that the old instruments are better than what's being built today, or really even close.

Dave
View user's profile Send private message Send e-mail
Jeff Highland

 

From:
New South Wales, Australia
Post  Posted 31 Oct 2019 3:14 pm    
Reply with quote

Absolutely
There are some great pickup makers around doing vintage style pickups, or there are modern types, your choice.
Better tuners are the rule rather than the exception, and there is no magical tonewood under the typical painted or covered vintage lap.
And these days with a custom builder you get choices in scale length and string spacing etc.
I am quite attached to my 49 Supro and 50 National NY but I'm under no illusions that they represent the best possible tone or playability.
View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 31 Oct 2019 4:42 pm    
Reply with quote

Here’s my sons Zane’s favorite lap.
She has a large horseshoe magnet pickup.


View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 31 Oct 2019 4:59 pm    
Reply with quote

Thanks CE here’s my favorite she has a three inch maple neck the full length of the lap with flame maple body wings. She’s a 25 inch scale , fret slots were miles into neck an filled with different natural color wood .0


View user's profile Send private message Send e-mail
Lee Holliday


From:
United Kingdom
Post  Posted 31 Oct 2019 10:58 pm    
Reply with quote

Johnnie, with electric guitars Yes there are the electronics but if it is acoustically resonant in the 1st place adds to the chances of achieving good tone. Your choice of pickup and quality pots & wiring etc add to the tone, there is a Duesenberg regularly seen on youtube/facebook with Luke Cyrus Goetze and a Lollar Valco strings through pickup which sounds as good as any of the vintage ones.

So the formula as I can see it is resonant timber, correct electronics, in the right hands = half a chance at good vintage tone.

Regards

Lee
View user's profile Send private message Send e-mail
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 1 Nov 2019 7:23 am    
Reply with quote

Not sure if I told you this before, but if I didn't, my favorite one is the Spalted Maple peanut shaped body one. I like stuff that is different......and that one fits the bill. They are all nice and I'll bet they sound great. I'm surprised your son's favorite is that National.....do you still talk to him????? Whoa!
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 1 Nov 2019 10:30 am    
Reply with quote

I think one reason the vintage ones seemed to sound better is who was around playing them when they were new! Smile

I like the mojo of vintage instruments, feels like they could tell a story, but I'm under no illusion they are innately superior.

One area where modern builds kind of lose out to vintage is the non-pedal multineck / console market. There are probably a couple makers making these but by and large most custom builders these days are making lap steels, not consoles. If you want a D8 or a T8, it's either a -LOT- of money for a custom commission or head straight to the vintage market (which is what I did). I'm not saying its a problem...the market probably just doesn't bear it out. I kind of wish I could get something like the tone from my Clinesmith frypan in a D8 but I shudder to think of the cost...I'll just hump my console along with it, or just retune like a normal person haha!
_________________
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me
View user's profile Send private message Send e-mail
Glenn Wilde

 

From:
California, USA
Post  Posted 2 Nov 2019 4:48 am    
Reply with quote

Beautiful steels Johnie. Yes to the original question, two of my vintage steels have new Duncan pickups in them and sound killer.
View user's profile Send private message Send e-mail
C. E. Jackson


Post  Posted 2 Nov 2019 5:30 am    
Reply with quote

Johnie King wrote:
Thanks CE here’s my favorite she has a three inch maple neck the full length of the lap with flame maple body wings. She’s a 25 inch scale , fret slots were miles into neck an filled with different natural color wood .0




Johnie, that is really an attractive steel design. I really like the way you anchor the strings at the end, and the
location of the plug-in for the amp. The 25" scale should make great harmonics. Great colors and design.

C. E. Jackson Smile
_________________
My Vintage Steel Guitars
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
View user's profile Send private message Send e-mail Visit poster's website
Johnie King


From:
Tennessee, USA
Post  Posted 2 Nov 2019 4:53 pm    
Reply with quote

Thanks George I love your personal collection of laps you have made. Would you post pictures of your favorite builds ones you have an ones you have sold.
View user's profile Send private message Send e-mail
Ed Pettersen


From:
Tennessee, USA
Post  Posted 2 Nov 2019 5:46 pm     Re: Can today’s lap builds equal vintage laps tone?
Reply with quote

Johnie King wrote:
Here you go David my table with Grandpas old iron wheels .
With a strong market for vintage laps I’m wondering if
Some new hand crafted laps equal the tone of the average vintage laps, notice I’m asking
Average vintage tone not your very rare tone too the bone high dollar lap steel with horse shoe pickups. I do see Jerry Douglas plays late model custom made laps an so dose The great Billy Roberson he’s the only guy I know that can slant a bar both ways at the same time at least it sounds like he does.
Zking hand crafted laps come get you one!
Custom wound pickups on Six string laps
Ten stingers have True Tone pickups
Professionally wired with best parts available. I will

I will have a booth at Bobby Reeds stars a steel guitar show here in Nashville.
November 14/15/16 come check these an more out.








That 10 string third from the left is amazing!
_________________
Singer-songwriter, author, composer and full-time musician, ie: poor! <g>
View user's profile Send private message Send e-mail Visit poster's website
Johnie King


From:
Tennessee, USA
Post  Posted 5 Nov 2019 12:29 pm     Re: Can today’s lap builds equal vintage laps tone?
Reply with quote

Ed Pettersen wrote:
Johnie King wrote:
Here you go David my table with Grandpas old iron wheels .
With a strong market for vintage laps I’m wondering if
Some new hand crafted laps equal the tone of the average vintage laps, notice I’m asking
Average vintage tone not your very rare tone too the bone high dollar lap steel with horse shoe pickups. I do see Jerry Douglas plays late model custom made laps an so dose The great Billy Roberson he’s the only guy I know that can slant a bar both ways at the same time at least it sounds like he does.
Zking hand crafted laps come get you one!
Custom wound pickups on Six string laps
Ten stingers have True Tone pickups
Professionally wired with best parts available. I will

I will have a booth at Bobby Reeds stars a steel guitar show here in Nashville.
November 14/15/16 come check these an more out.








That 10 string third from the left is amazing!

View user's profile Send private message Send e-mail
Johnie King


From:
Tennessee, USA
Post  Posted 5 Nov 2019 12:30 pm     Re: Can today’s lap builds equal vintage laps tone?
Reply with quote

Ed Pettersen wrote:
Johnie King wrote:
Here you go David my table with Grandpas old iron wheels .
With a strong market for vintage laps I’m wondering if
Some new hand crafted laps equal the tone of the average vintage laps, notice I’m asking
Average vintage tone not your very rare tone too the bone high dollar lap steel with horse shoe pickups. I do see Jerry Douglas plays late model custom made laps an so dose The great Billy Roberson he’s the only guy I know that can slant a bar both ways at the same time at least it sounds like he does.
Zking hand crafted laps come get you one!
Custom wound pickups on Six string laps
Ten stingers have True Tone pickups
Professionally wired with best parts available.

I will have a booth at Bobby Reeds stars a steel guitar show here in Nashville.
November 14/15/16 come check these an more out.








That 10 string third from the left is amazing!

View user's profile Send private message Send e-mail
Ed Pettersen


From:
Tennessee, USA
Post  Posted 5 Nov 2019 3:22 pm     Re: Can today’s lap builds equal vintage laps tone?
Reply with quote

Johnie King wrote:


That 10 string third from the left is amazing!

[/quote]

Very, very nice!!!
_________________
Singer-songwriter, author, composer and full-time musician, ie: poor! <g>
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron