| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Steel Guitar Stomp Tuning ?
Reply to topic
Author Topic:  Steel Guitar Stomp Tuning ?
Brentley Dahmer


From:
Richmond, VA
Post  Posted 6 Oct 2019 6:07 am    
Reply with quote

Curious about this song.

Been playing in A6 for a few weeks and am starting to stumble across some familiar sounds. After some listening and experimenting I've got most of the core pieces down from the first 40 seconds- but after that ??

Wanted to ask if any of you with a better ear can confirm that he's just going to another neck/tuning at this point in the song and if so, what it might be.

Thanks

https://youtu.be/hI2mTNj2-rE
View user's profile Send private message Send e-mail
Glenn Wilde

 

From:
California, USA
Post  Posted 6 Oct 2019 6:27 am    
Reply with quote

Man, that's swinging. Did Leon or anybody even have a multi neck steel in '37?
View user's profile Send private message Send e-mail
David Ball


From:
North Carolina High Country
Post  Posted 6 Oct 2019 6:38 am    
Reply with quote

Sounds like maybe he moved over to his "bass neck" for at least awhile. There are some awfully low notes in there...

Dave
View user's profile Send private message Send e-mail
C. E. Jackson


Post  Posted 6 Oct 2019 7:31 am    
Reply with quote

Glenn Wilde wrote:
Man, that's swinging. Did Leon or anybody even have a multi neck steel in '37?

Here is one of my earlier posts. When you read the news article by Dale Goens, it is evident that famous
players like Noel Boggs and Leon McAuliffe were interested in the ROCCO DOUBLE NECK STEEL. Note also,
that Noel Boggs is playing a ROCCO Steel in the photo of Bob Wills and the Texas Playboys. Goens states
that his ROCCO was the first double neck steel brought into Oklahoma.

C. E. Jackson wrote:
EPIPHONE ELECTAR ANTHONY ROCCO 7-8 STRING: c. 1937




Note that Noel Boggs is playing a Rocco on a stand.





1. The top is metal, aluminum, extends under the fret-board to the nuts, and has a decorative etching.
2. Overall string spacing is 2 3/16 at the nut on both the 7 and 8 string necks.
3. Pickup Magnets 1 1/4 x 4 1/2 Horse-Shoe, are adjustable.
4. There are no string-mutes on this model, because the small white knobs turn each neck on or off.
5. The black knobs in the middle adjust volume and tone.
6. No legs, so it is played on the lap or a stand.
7. Fret-boards are bound.
8. Scale length is 22 1/2.
9. Tuners on the 7 string neck have the name Grover.
10. I believe the tuners on the 8 string neck are Grover, but don't have a name.
11. The Rocco Bar can be used with the wood or metal side on the strings to produce different tones.
12. The Dale Goens photo is from "American Guitars" by Tom Wheeler Copyright 1992.
13. The Noel Boggs photo is from "San Antonio Rose" by Charles R. Townsend Copyright 1976 and 1986.
14. Tone produced by the pickup magnets is excellent.

C. E. Smile

_________________
My Vintage Steel Guitars
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
View user's profile Send private message Send e-mail Visit poster's website
Einar Baldursson


From:
Stockholm, Sweden
Post  Posted 6 Oct 2019 10:10 am    
Reply with quote

I may be mistaken but it sounds to me like he's playing an E tuning here. Probably straight E major as in Steel Guitar Rag, possibly E7th. Those low notes don't go below the open E string in pitch.
View user's profile Send private message Send e-mail Visit poster's website
Clyde Mattocks

 

From:
Kinston, North Carolina, USA
Post  Posted 6 Oct 2019 1:15 pm    
Reply with quote

Am I missing something here? The heading of the post asks about Steel Guitar Stomp from 1937 and the video is Leon playing Big Beaver on a Bigsby that wasn't around in 1937. I believe the original Steel Guitar Stomp was played on a straight E six string tuning.
_________________
LeGrande II, Nash. 112, Fender Twin Tone Master, Session 400, Harlow Dobro, R.Q.Jones Dobro
View user's profile Send private message Send e-mail
Brentley Dahmer


From:
Richmond, VA
Post  Posted 6 Oct 2019 2:25 pm    
Reply with quote

Einar Baldursson wrote:
I may be mistaken but it sounds to me like he's playing an E tuning here. Probably straight E major as in Steel Guitar Rag, possibly E7th. Those low notes don't go below the open E string in pitch.


Now that you mention it I can hear it.

Clyde Mattocks wrote:
Am I missing something here? The heading of the post asks about Steel Guitar Stomp from 1937 and the video is Leon playing Big Beaver on a Bigsby that wasn't around in 1937. I believe the original Steel Guitar Stomp was played on a straight E six string tuning.


Thanks- might get out my 6 string and Try open E.
it plays pretty good in A6, but something seems off.

C. E. Jackson wrote:
Glenn Wilde wrote:
Man, that's swinging. Did Leon or anybody even have a multi neck steel in '37?

Here is one of my earlier posts. When you read the news article by Dale Goens, it is evident that famous
players like Noel Boggs and Leon McAuliffe were interested in the ROCCO DOUBLE NECK STEEL. Note also,
that Noel Boggs is playing a ROCCO Steel in the photo of Bob Wills and the Texas Playboys. Goens states
that his ROCCO was the first double neck steel brought into Oklahoma.



Thanks for all the great info!
View user's profile Send private message Send e-mail
Glenn Wilde

 

From:
California, USA
Post  Posted 6 Oct 2019 4:53 pm    
Reply with quote

C. E. Jackson wrote:
Glenn Wilde wrote:
Man, that's swinging. Did Leon or anybody even have a multi neck steel in '37?

Here is one of my earlier posts. When you read the news article by Dale Goens, it is evident that famous
players like Noel Boggs and Leon McAuliffe were interested in the ROCCO DOUBLE NECK STEEL. Note also,
that Noel Boggs is playing a ROCCO Steel in the photo of Bob Wills and the Texas Playboys. Goens states
that his ROCCO was the first double neck steel brought into Oklahoma.

C. E. Jackson wrote:
EPIPHONE ELECTAR ANTHONY ROCCO 7-8 STRING: c. 1937




Note that Noel Boggs is playing a Rocco on a stand.





1. The top is metal, aluminum, extends under the fret-board to the nuts, and has a decorative etching.
2. Overall string spacing is 2 3/16 at the nut on both the 7 and 8 string necks.
3. Pickup Magnets 1 1/4 x 4 1/2 Horse-Shoe, are adjustable.
4. There are no string-mutes on this model, because the small white knobs turn each neck on or off.
5. The black knobs in the middle adjust volume and tone.
6. No legs, so it is played on the lap or a stand.
7. Fret-boards are bound.
8. Scale length is 22 1/2.
9. Tuners on the 7 string neck have the name Grover.
10. I believe the tuners on the 8 string neck are Grover, but don't have a name.
11. The Rocco Bar can be used with the wood or metal side on the strings to produce different tones.
12. The Dale Goens photo is from "American Guitars" by Tom Wheeler Copyright 1992.
13. The Noel Boggs photo is from "San Antonio Rose" by Charles R. Townsend Copyright 1976 and 1986.
14. Tone produced by the pickup magnets is excellent.

C. E. Smile

Thanks, now i know there was a double in '37.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron