| Author |
Topic: Rittenberry |
Dennis Wireman
From:
North West Indiana 47978
|
Posted 19 Sep 2019 7:52 pm |
|
here is another master piece from Gary, what a builder he is
 |
|
|
 |
Jerry Horch
From:
Alva, Florida, USA
|
Posted 20 Sep 2019 10:37 am Nice
|
|
What is that..kinda like bob wire inlay pattern ? Very nice.
_________________
Franklin D10 /Walker Sterio Steel JBL's /DigiTech Quad4/ Korg Toneworks/ Dobro DM 1000 / Santa Cruz Guitar VA |
|
|
|
Dale Foreman
From:
Crowley Louisiana, USA
|
Posted 20 Sep 2019 10:52 am Rittenberry Prestige
|
|
Beautiful Rittenberry Prestige! Who's the owner?
_________________
Rittenberry Prestige(2) |
|
|
|
Gary Rittenberry
From:
Tennessee, USA
|
Posted 20 Sep 2019 1:24 pm
|
|
| Acutually Jerry there are 3 different pieces of acetate one MOP and one PAUHA ABALONE above and below the MOP GR. |
|
|
|
Roger Crawford
From:
Griffin, GA USA
|
Posted 20 Sep 2019 1:43 pm
|
|
| That’s beautiful, Gary! |
|
|
|
Frank Raines
From:
Ohio, USA
|
Posted 20 Sep 2019 2:41 pm Pictures
|
|
| I`d like to THANK Gary for building this steel for me we`re waiting on the case, and am ( maybe Denny)are ready to hit the highway to Gary`s. these pictures are burr from my cell phone Denny was kind enough to post them for me, if ya could see the clear ones ya can see ONE OUTSTANDING RED RITTENBERRY STEEL and he NAIL the color perfect!, CAN`T WAIT, Thanks Gary frank and see ya real soon my friend |
|
|
|
Gary Rittenberry
From:
Tennessee, USA
|
Posted 20 Sep 2019 3:49 pm
|
|
| Thanks Jerry,Roger,Dennis and Frank GR. |
|
|
|
Ken Pippus
From:
Langford, BC, Canada
|
Posted 20 Sep 2019 4:09 pm
|
|
| Nothing quite like a Rittenberry. Sure like mine. |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 20 Sep 2019 5:08 pm
|
|
Congrats too Gary an Frank!!
Last edited by Johnie King on 20 Sep 2019 5:11 pm; edited 1 time in total |
|
|
|
Mike Scaggs
From:
Nashville, TN
|
Posted 20 Sep 2019 5:10 pm
|
|
Gary is no doubt "THE MAN". Great builder and great guy
_________________
I can explain it to you but I can't understand it for you
Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com |
|
|
|
Derek Puckett
From:
Cookeville Tn
|
Posted 21 Sep 2019 6:45 am New pictures
|
|
I work with Garry here are a few pictures
 |
|
|
|
Dale Foreman
From:
Crowley Louisiana, USA
|
Posted 21 Sep 2019 7:09 am Rittenberry
|
|
Hey Gary, why do the end plates on the older Prestige guitars like mine have screws in the end plate and the newer builds don’t? Dale Rottacker wants to know too. He has Wayne’s guitar.
_________________
Rittenberry Prestige(2) |
|
|
|
Frank Raines
From:
Ohio, USA
|
Posted 21 Sep 2019 9:14 am Answer
|
|
Dale
I ask if he could built it the way I wanted it when I order it. I wanted the old style end plates no screws and the old style taper neck and he did, everything else is the same as any Prestige I supply the chrome 705. Hope this help with your question Gary GREAT to work with, thanks God Bless frank |
|
|
|
Bruce Blackburn
From:
Nashville, Tennessee
|
Posted 21 Sep 2019 9:51 am
|
|
Love mine too!
_________________
Rittenberry Prestige D10, Dekley S14U, (stolen) ZumSteel D10
(2) Nashville 112's Nashville 1000, Profex II Kemper Profiler Powered, Quilter Tone Block 202, Benado Steel Dream |
|
|
|
Gary Rittenberry
From:
Tennessee, USA
|
Posted 21 Sep 2019 1:43 pm
|
|
| Hey Dale the customer Mr. Frank Raines wanted this guitar custom built for him. I did this and explained that the guitar would be more stable with the bolt on end plates and would probally sound a little different than the standard prestige even though everthing else was the same.The changes made were the end plates, neck, and custom inlays to date I have built 2 guitars that are like this. this note is for my good friends Dale Foreman and Dale Rottaker thanks GR. |
|
|
|
Gary Rittenberry
From:
Tennessee, USA
|
Posted 21 Sep 2019 1:50 pm
|
|
| Hey Mike Scaggs You are truly a great craftsman the Emmons refurbs have been amazing as i have followed your rebuilds now for a while and you are also a good friend GR. |
|
|
|
Dale Rottacker
From:
Walla Walla Washington, USA
|
Posted 21 Sep 2019 3:48 pm
|
|
| Gary Rittenberry wrote: |
| Hey Dale the customer Mr. Frank Raines wanted this guitar custom built for him. I did this and explained that the guitar would be more stable with the bolt on end plates and would probally sound a little different than the standard prestige even though everthing else was the same.The changes made were the end plates, neck, and custom inlays to date I have built 2 guitars that are like this. this note is for my good friends Dale Foreman and Dale Rottaker thanks GR. |
Thank you Gary... this is a beautiful guitar, and that inlay design mouthwatering
_________________
Dale Rottacker, Steelinatune™
https://www.youtube.com/@steelinatune
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com |
|
|
|
Scott Truax
From:
Florida
|
Posted 22 Sep 2019 6:29 am Rittenberry
|
|
Gary,
Beautiful guitar! Just as every one you build is!
Scott |
|
|
|
Steven Hicken Jr.
From:
Leeds, United Kingdom
|
Posted 25 Sep 2019 6:15 am
|
|
Drop dead gorgeous!
The inlay is terrific.
_________________
25 year old wannabe.
2015 Show Pro
2020 Hudson Hudsonator (Pedabro)
202X *Insert new guitar here*
https://www.stevenhickenjr.com/ |
|
|
|
