| Author |
Topic: ROLAND CUBE 80 XL - Need Amp Settings |
Kenneth Kotsay
From:
Davie/Ft Lauderdale, Florida
|
Posted 27 Aug 2019 9:10 am |
|
I'm in need of settings for my Cube 80XL.
Be free to post your settings if you currently own this amp.
Great amp, very versatile, great sound with my new MSA D-10 Legend. |
|
|
 |
Jim Saunders
From:
Houston, Texas, U.S.A.
|
Posted 27 Aug 2019 1:38 pm Settings
|
|
I use the Black Panel, bright off; clean, bass 2:00, mid 12:00; treble 12:00; presence 9:00, EFX off, delay 10:00, spring reverb 10:00.
That works for me. You can use the lead setting depending on your ear and the venue. |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 27 Aug 2019 2:55 pm
|
|
I have always turned the Bright switch off and the Presence control completely counter-clockwise (off).
Sometimes I use these settings:
Bass: 2 o'clock
Middle: 10 o'clock
Treble: 10 o'clock
Sometimes I use these settings:
Bass: 12 o'clock
Middle: 9 o'clock
Treble: 9 o'clock
I use the JC Clean channel.
I use the Plate reverb, set at 3 o'clock.
_________________
Lee, from South Texas - Down On The Rio Grande
There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.
Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat |
|
|
|
John LeMaster
From:
North Florida
|
Posted 6 Sep 2019 9:56 am Check your pm's
|
|
Ken, sent you a Private Message via the Forum.
John L.
_________________
Magnum D10, Emmons D10 push-pull |
|
|
|
