| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Delay-Reverb
Reply to topic
Author Topic:  Delay-Reverb
George Frachiseur

 

From:
Arkansas, USA
Post  Posted 28 Aug 2019 10:26 pm    
Reply with quote

Just wondering what everyone's thoughts were on the best Analog Delay-Reverb unit or box for Pedal Steel guitar is?
Tone control or no tone control on it?
Multiple types of verb? that is spring, plate etc.

Penny for your thoughts; umm make that a dime, to account for inflation lol.....
View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 28 Aug 2019 11:40 pm    
Reply with quote

The best analogue device is a plate. This is a fixed installation. AKG used to make a portable device back in the eighties that simulated one using multiple springs. It was about the size of a refrigerator (small American or large European) and cost many thousands.

The traditonal spring tank is therefore the only realistic option, which is why everything has gone digital.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
Ken Metcalf


From:
San Antonio Texas USA
Post  Posted 29 Aug 2019 5:49 am    
Reply with quote

A Dispatch Master is much easier to set / adjust that say a RV-3.
https://www.youtube.com/watch?v=4PLkVcS_6dk
_________________
MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes
View user's profile Send private message Send e-mail
Ed Pettersen


From:
Tennessee, USA
Post  Posted 29 Aug 2019 6:06 am    
Reply with quote

A really terrific new device for both delay and reverb is the Poly Effects Digit. You can have up to four delays and real convolution reverbs. My favorites were the aforementioned AKG spring and the EMT plates. I even did a bunch of presets for the builder when he was in Nashville for SNAMM. Highly recommended.
_________________
Singer-songwriter, author, composer and full-time musician, ie: poor! <g>
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 29 Aug 2019 7:29 am    
Reply with quote

I've always preferred to separate units for delay and reverb, more choices in settings. Very Happy
Erv
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 29 Aug 2019 8:01 am    
Reply with quote

Erv Niehaus wrote:
I've always preferred to separate units for delay and reverb, more choices in settings. Very Happy
Erv

Me too, but for different reasons. Digital delays and reverbs sound sterile to my ears, which is the main reason I prefer playing through analog units. They may be okay in a studio or for practicing, but in a live band situation with drums, the digital units I've played through get lost in the cymbal wash and ten feet from the stage they're hardly noticeable.

The three-knob Fender 6G15 would be my first choice (not the later FINO reissue) for spring reverb, but they're spendy. A viable alternative is the Van Amps Sole-Mate, which is basically a solid-state variation on the 6G15 circuit. Since Tim Van Tassel quit production a while back, they're currently selling for high prices, too. A very nice sounding reverb pedal with a genuine MOD spring tank inside a fairly compact unit:



My favorite analog delay is Forumite Keith Hilton's Legend Pro Delay. Easy to make sound good at a bargain price:

https://hiltonelectronics.com/legend-pro-delay
View user's profile Send private message Send e-mail
Dennis Detweiler


From:
Solon, Iowa, US
Post  Posted 29 Aug 2019 7:51 pm    
Reply with quote

I use the MXR carbon copy analog delay pedal in line with the TC Electronic Hall Of Fame pedal. The Hall Of Fame is capable of downloading toneprints of other players preferred toneprint modifications or you can download the toneprint editor and make your own reverb from scratch. Time consuming, but if you're finicky about what suits you, the editor is the way to go. You can electronically custom build your own and download it into the pedal.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8.
View user's profile Send private message Send e-mail
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 30 Aug 2019 10:00 am    
Reply with quote

Well....there are a lot of versions of "best", aren't there?

Electric setup, I go with my Milkman amp built-in reverb, and add a little delay from the cute little box that Megan Lovell of Larkin Poe uses with her Ric B6 Panda lap steel...the Mooer Ana Echo mini-pedal. Many of those mini-pedals seem to be based on some sort of chorus-like circuit, and seem to have a touch of chorus underneath whatever the pedal does...and it sounds great! So... cheap, tiny, and the sound I didn't know I was looking for are "best", for me.

For my straight-to-the-PA acoustic setup, a Baggs Venue DI, I add a little plate reverb in the effects loop, again from a cute, cheap little mini-pedal, this time the Donner Verb Square...

For me, these have enough control and tone to get what I need...I did have to try a number of them to find brands that sounded good - there are a handful of mini-pedal companies out there now, and each of them have some that sound good, and some that are crap...


_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 30 Aug 2019 10:32 am    
Reply with quote

Steve Lipsey wrote:
there are a handful of mini-pedal companies out there now, and each of them have some that sound good, and some that are crap...

Even though I favor the Hilton (built by Americans in the United States of America), I also have a disposable Chinese Joyo JF-33 that cost under thirty bucks delivered to my mailbox that sounds just fine. Reportedly a clone of the Carbon Copy for about 1/4 its cost.
View user's profile Send private message Send e-mail
George Frachiseur

 

From:
Arkansas, USA
Post  Posted 30 Aug 2019 9:34 pm     Effects
Reply with quote

Thank you all for your input, it's been a huge help.
View user's profile Send private message Send e-mail
Travis Wilson


From:
Johnson City, TX
Post  Posted 31 Aug 2019 6:04 am    
Reply with quote

Ive been wanting one of the BeniDub Spring Amps for other things, but I feel you could use it with a PSG. You need your own tank, but you can get those cheap and you can get the decay length you want, they look very customizable to shape the sound too.

https://www.benidub.com/spring-amp-2/
View user's profile Send private message Send e-mail
Ron Hogan

 

From:
Nashville, TN, usa
Post  Posted 31 Aug 2019 9:02 am    
Reply with quote

The ZOOM 70 PEDAL IS GREAT. I use it when not using my LEXICON rack.

see here
View user's profile Send private message
Brad Richard


From:
Chisago City, Minnesota
Post  Posted 31 Aug 2019 2:55 pm    
Reply with quote

Ron - I wasn't even aware of the Zoom 70! It looks great. I've got a Flashback mini delay and have been thinking about a separate verb. I think I'll look into this and sell the Flashback (it's really nice too). Thanks for the tip.
Brad
View user's profile Send private message Send e-mail
Cartwright Thompson


Post  Posted 31 Aug 2019 3:18 pm    
Reply with quote

Just out of curiosity George, why did you just sell your Steel Dream pedal? Doesn’t that have both reverb and delay?
View user's profile Send private message
George Frachiseur

 

From:
Arkansas, USA
Post  Posted 31 Aug 2019 8:19 pm    
Reply with quote

Cartwright, Yes it has a superb reverb and delay with the Nutra Drive which can be set to give you some tube sound (Warmth)and huge fat tone. I sold the steal Dream because No more than I play, I couldn't justify a new toy $700 + $20 for the supply for it (That is too my wife). I have a DD7 that does fine for me. But thats why, I was just asking to see what everybody else was using, I like keeping up with whats being used even if I can't have it Sad
View user's profile Send private message Send e-mail
Ed Pettersen


From:
Tennessee, USA
Post  Posted 31 Aug 2019 11:33 pm    
Reply with quote

The Zoom 70 is indeed great and very affordable.
_________________
Singer-songwriter, author, composer and full-time musician, ie: poor! <g>
View user's profile Send private message Send e-mail Visit poster's website
Ron Hogan

 

From:
Nashville, TN, usa
Post  Posted 1 Sep 2019 6:17 am    
Reply with quote

Brad,

I use 3 blended settings when playing.

Reverb

Reverb & chorus

Reverb & delay

I was working Broadway in Nashville and some of those stages are so cramped, there's no room for a rack unit (LEXICON). So I had to get something small, powerful and one that had quality effects. Went on a research spree and the ZOOM became my Friend.

I had to come up with a clip that could hold it to my guitar leg as I didn't want it on the floor where I couldn't access the knobs (no longer available).

LEG CLIP

VIDEO
View user's profile Send private message
Brad Richard


From:
Chisago City, Minnesota
Post  Posted 1 Sep 2019 11:15 am    
Reply with quote

Hi Ron,
I think this is the pedal I've been looking for. I like your leg clip-pretty slick. I'll be using it with my lap steel so I think I'll end up attaching it directly to the guitar if anything.
Thanks again,
Brad
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron