Power supply

Harold Dye · From: Cullman, Alabama, USA

Does anyone know if a one spot will work for a Digitech RP 155? The power supply for mine is starting to act up and I have a one spot I use with my Boss DD 3. The instruction manual list many pedals that it works with including some Digitechs. It list the RP 50 and 100 but says it is incompatible with the RP 200 and higher. If I were to try it is there a chance it will harm the RP 155?

Bill A. Moore · From: Silver City, New Mexico, USA

If the voltage, polarity, and the load available is within limits, it should work.

David Nugent · From: Gum Spring, Va.

Your unit calls for a 9V,1.3 Amp adapter (RP0913B). It appears to have been discontinued as well as the RP155.

Jack Stoner · From: Kansas City, MO

This requires 9 volts AC, not DC.

Here is one from Amazon that is listed for the RP100
https://www.amazon.com/Adapter-Charger-Digitech-Processor-Switching/dp/B01IR4A9GK/ref=sr_1_3_sspa?keywords=digitech+rp50+9+volt+ac+adapter&qid=1566424228&s=gateway&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVklaWFlGNUNLSlQ2JmVuY3J5cHRlZElkPUEwNTQ1Nzg5MUdOUldLWDlSWlU5MyZlbmNyeXB0ZWRBZElkPUEwMDg5ODY3M0dZWDVQWVBFVzQzUSZ3aWRnZXROYW1lPXNwX210ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Greg Cutshaw · From: Corry, PA, USA

Looks like Amazon has this power supply, $16.95:

https://www.amazon.com/HQRP-Adapter-Digitech-PS0913B-Transformer/dp/B00B1QY1DY/ref=sr_1_1_sspa?keywords=digitech+ps0913b+power+supply&qid=1566424607&s=gateway&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExV0QxRVEwOUhNUERMJmVuY3J5cHRlZElkPUEwMTQ0Njc0Mkw1MFE4RktOQ0Q4TyZlbmNyeXB0ZWRBZElkPUEwMzM4MDA5S1dUSDJZNERZQ1dJJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Harold Dye · From: Cullman, Alabama, USA

Thanks guys

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: