| Author |
Topic: Peavey Nashville 400 ken fox mod. |
Alan Cook
From:
Kent,England
|
Posted 24 Jul 2019 11:06 pm |
|
I have a Nash 400 that had ken fox mods fitted before I bought it. I has always had a intermittent falt that I have managed to live with but now the reverb has stopped working completely.
Does anyone have a diagram showing the mods they could scan and send me?
Any suggestions welcome I have had it fixed twice but don't believe they got to the cause of the problem.
Thanks in advance
Alan. |
|
|
 |
Ken Fox
From:
Nashville GA USA
|
Posted 25 Jul 2019 7:14 am Mod
|
|
Was that the full “intense mod� Those were only done in my shop. I have since shared the info fir others in the past so they they could purchase parts and do their own mod
I never sold the full mod package. The mods I sell are chips only that allow users to unplug and plug in new chips |
|
|
|
Alan Cook
From:
Kent,England
|
Posted 25 Jul 2019 7:25 am
|
|
Hi Ken
Thanks for the reply, I've no idea which mods were used, but they were done in the Uk on a 240v Uk amp. So I guess not the "intense mod" amp and mod was purchased new by the late Spencer Scott probably about 6 years ago.
Alan. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 25 Jul 2019 7:27 am
|
|
If that is the case then the mod would just be a change out of 5 audio preamp chips
A regular schematic is all you will need.
If you PM your email address I will send you the info |
|
|
|
Alan Cook
From:
Kent,England
|
Posted 25 Jul 2019 7:36 am
|
|
| Thanks Ken will do. |
|
|
|
Bob Metzger
From:
Waltham (Boston), MA, USA
|
Posted 25 Jul 2019 9:33 am
|
|
Hi Alan,
I've had some experience with the NV400 and its various mods, especially the reverb circuit, and I may be able to be of assistance to you. Please send me your email address.
Best,
Bob Metzger
_________________
Bob M. |
|
|
|
