| Author |
Topic: need help please |
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 15 Jul 2019 3:26 pm |
|
mullen sent me a tuning chart for my mullen sd 10 rp the chart says tune 1st open f# then rkl goes to g# i cannot get it tuned to what the chart says done broke one 1st any help would be appreciated thanks
_________________
Mike Bowles |
|
|
 |
Jerry Roller
From:
Van Buren, Arkansas USA
|
|
|
|
Carl Kilmer
From:
East Central, Illinois
|
Posted 16 Jul 2019 4:02 am
|
|
Tune 1st string open to F# then hit RKL lever and with
the 1st string hex nut on the changer tune it so it'll
sound just like the 3rd string with no pedals down.
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 16 Jul 2019 6:50 am mullen sd 10 rp emmons set up 3x4
|
|
thanks for your help guys it just keeps jumping backwards and forwards
_________________
Mike Bowles |
|
|
|
Fred Treece
From:
California, USA
|
Posted 16 Jul 2019 7:56 am
|
|
You might have to start over with the hex nut. With the RKL engaged, back the nut out until the string goes back to its F# open tuning. Then let off the lever and double check the open tuning. Make sure to give the string some good solid pulls with your hand to make sure it’s stable. Then re-engage the lever and try tuning up again.
Is your tuner okay? |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 16 Jul 2019 8:11 am need help
|
|
i am using a snark but i have a korg i will try again as soon as i get back thanks fred
_________________
Mike Bowles |
|
|
|
Larry Ball
From:
Airdrie, Alberta, Canada
|
Posted 16 Jul 2019 2:10 pm
|
|
Hi Mike,
I also have a "Mullen" SD10 rp. there should be no problems with a 012. also check your RKL for a halfstep to E on the second string, that is on mine but not listed in the info from Mullen. That I believe was an Emmons Copedent.
Also I assume when you are putting on new strings there is no kinks on the string.
_________________
Mullen SD10, Sho~Bud SD10 LDG, Show-Pro SD10 LDG, Peavey Nashville 112, Boss Katana 100 MK11, Telonic's F100 Multi-Taper Super Pro V/P, |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 16 Jul 2019 2:37 pm need help please
|
|
thanks for your reply they sent me the wrong chart got to move rod to get a g# thanks again
_________________
Mike Bowles |
|
|
|
Fred Treece
From:
California, USA
|
Posted 16 Jul 2019 2:45 pm
|
|
| That was going to be my next suggestion. Now you need a rodding expert, which I am not. Maybe Larry can help you with that. Or maybe you could start another thread with “rodding help†in the title. |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 16 Jul 2019 2:52 pm need help please
|
|
i know how to change the rods but i dont want to change it thanks
_________________
Mike Bowles |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 19 Jul 2019 7:03 am need help please
|
|
still having trouble tuning my mullen sd 10 rp any help is appreciated deeply ttt
_________________
Mike Bowles |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 19 Jul 2019 9:35 am
|
|
| I think you will need to be more specific as to what the problem is. |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 19 Jul 2019 12:14 pm need help please
|
|
thanks lee i think i had the pedal and lever nuts mixed up i went by the tuning chart mullen sent i think i finally got it it sounds good to me now i was a mess i played along with a cd it sounded ok to my ears thanks to everyone
_________________
Mike Bowles |
|
|
|
