Adding a lever or pedal to a Mullen RP?

Michael Berry · From: California, USA

Hi all,

I have a Royal Precision 3+4 which is a great guitar in my experience. Or at least compared to the Carter Starter I started with Smile

Anyway, I'm thinking about what would be involved in adding a knee lever or additional pedal. Is this a fairly easy task for someone who's not afraid to cut their knuckles? If so, what would be the most useful change and a lever or a pedal?

Thanks folks. This forum is invaluable!

Danny Letz · From: Old Glory,Texas, USA 79540

I added a verticle and a Franklin pedal to a RP for a friend of mine. It was a fairly easy guitar to work on comparatively speaking. I do have some experience though. Drilling the holes for the pedal mount was touchy & after the fact I found that they had drilled a template into the wooden plank that they had the rods taped to for shipping. The folks at Mullen were taking care of me but I didnâ€™t have enough sense to find it.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: