| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic For Carter Starter users....
Reply to topic
Author Topic:  For Carter Starter users....
Brandon Housewright

 

From:
Statesboro, Georgia, USA
Post  Posted 2 Jun 2006 1:23 pm    
Reply with quote

I'm wondering how many of you like them and would keep them to play out with. Do they seem to be built well? I want something that will last and is easy to play and take care of but doesn't cost an arm and a leg. Thanks in advance.

[This message was edited by Brandon Housewright on 02 June 2006 at 02:24 PM.]

View user's profile Send private message Send e-mail
Dave Baldwin

 

From:
Saskatchewan, Canada
Post  Posted 2 Jun 2006 2:12 pm    
Reply with quote

hi brandon i have one i got it new and love it stays in tune plays nice sound real good and looks to me like its well made it nice and lite a plus for me if you want any more info email me dave
View user's profile Send private message Send e-mail
Gary Shepherd


From:
Fox, Oklahoma, USA
Post  Posted 2 Jun 2006 9:26 pm    
Reply with quote

If you don't already own a pedal steel, I'd suggest getting the Carter Starter just to see if you "have what it takes". Lots of people think they're going to play pedal steel and give up withing a year.

The Starter has most of the changes you'll want. Possibly all you'll ever need. If you stick with it, you'll eventually want to get a pro guitar but there's certainly nothing wrong with the Carter Starter.

Excellent guitar for the price.

------------------
Gary Shepherd

Carter D-10

www.16tracks.com
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
Tony Prior


From:
Charlotte NC
Post  Posted 3 Jun 2006 1:21 am    
Reply with quote

Low price..STARTER, with many very common changes which is what makes this Steel the value that it is...with a 3+4 config.

but do keep in mind that it should NOT be compared to the Carter PRO line regarding changer ,undercarriage pickups etc...

As mentioned above, most folks purchase one, learn and play, perhaps for a few years, then the transistion to a PRO Guitar is pretty easy... unlike the Student Guitars that are configured with 3+1...where you now have to learn how to play with the other 3 very common Knee lever pulls...two of which are the raise and lower of the E's...which in todays Pedal Steel Music is for the most part MANDATORY....

t

------------------
------------------
TPrior
TPrior Steel Guitar Homesite


View user's profile Send private message Send e-mail Visit poster's website
Brandon Housewright

 

From:
Statesboro, Georgia, USA
Post  Posted 3 Jun 2006 5:01 am    
Reply with quote

I've had 3 steels previously. The first one was a student model. The second was a new pro model that played wonderfully and stayed in tune but had more on it than I wanted to fool with. The last one had THE TONE and setup, but was a nightmare for me to keep maintained and feel the way I wanted it to. sometimes. It boils down to the fact I only want the basic changes on a guitar that is easy to play and maintain but still can be reliable in the future if I want to use it out on a weekend. The CS looked to fit the bill to me.
View user's profile Send private message Send e-mail
A. J. Schobert

 

From:
Cincinnati, Ohio,
Post  Posted 3 Jun 2006 5:13 am    
Reply with quote

I played an old sho-bud with 3&4 and I thimk the carter starter is the same with the 3&4 set up, my thinking as with alot others is I didn't want to pay alot and not like it well I do like it and now I have a carter d10, just be carfull if you buy used make sure you see the guitar first. good luck
View user's profile Send private message Send e-mail
Brandon Housewright

 

From:
Statesboro, Georgia, USA
Post  Posted 3 Jun 2006 5:14 am    
Reply with quote

I would definitely buy new.

[This message was edited by Brandon Housewright on 03 June 2006 at 06:23 AM.]

View user's profile Send private message Send e-mail
David L. Donald


From:
Koh Samui Island, Thailand
Post  Posted 3 Jun 2006 5:44 am    
Reply with quote

Remeber the changes on this steel are welded in.
There is no making different copedent ideas a reality.
As someone who has owned other steels this might be an issue.

On the other hand for E9, it is set up
as close to any "standard" as there is.

ie' most any player can sit down at it
from most pro steels and make music
with most of their logic intact.

If you are used to workhorse pro steels and play hard, (I do)
then also it might be a bit tender to use.

But it's a very good steel, and a GREAT value for beginners.
And the Carter people are great too.
View user's profile Send private message Send e-mail Visit poster's website
Brandon Housewright

 

From:
Statesboro, Georgia, USA
Post  Posted 3 Jun 2006 5:50 am    
Reply with quote

The more basic the better...unlike most people, I like to play without a lot of levers or changes. As long as I have ABC pedals and can lower 2 and 8 I'm good.
View user's profile Send private message Send e-mail
James Sission

 

From:
Sugar Land,Texas USA
Post  Posted 3 Jun 2006 6:32 am    
Reply with quote

Brandon, I bought a Carter Starter and was pretty disappointed with it. I did not care for the guitar at all. I ended up selling it on ebay and buying a pro model GFI and was happy then. I got the starter through musician’s friend and it had a problem and no one seemed interested in helping me fix it. Actually, there was more than one problem, but to answer your question, no, I didn’t keep it and I would not have played it on job. I took it to a lesson and the teacher played it and tuned it up then referred to it as "crude". If you buy a new one, expect to leave some money on the table when you go to sell it. If you want more specific details, feel free to email me...James
View user's profile Send private message Send e-mail
Brandon Housewright

 

From:
Statesboro, Georgia, USA
Post  Posted 3 Jun 2006 6:52 am    
Reply with quote

Thanks for all the input...it'll be a while before I buy again. Just wanted to research a little.
View user's profile Send private message Send e-mail
Ben Jones


From:
Seattle, Washington, USA
Post  Posted 3 Jun 2006 7:53 am    
Reply with quote

My experience was similar to James.
Bought the guitar from Musicians Friend, it had alot of problems and by problems I mean problems that made the guitar unplayable, so i returned it to Musicians Friend. Maybe we are all buying the same defective guitar from Musicians friend over and over? I have no doubt the one I returned is repackaged and awaiting sale if it hasnt been resold already. If you do go for the starter try and buy one built within the last couple years (date is on the packing slip inside the box)as I have a strong suspicion the earlier ones had some design flaws that they've since improved upon. best of luck.
View user's profile Send private message Send e-mail
Charlie McDonald


From:
out of the blue
Post  Posted 3 Jun 2006 10:28 am    
Reply with quote

Maybe Musicians' Friend is the problem.
I'd buy used on the forum; that way the bugs are worked out.
But you have to jump on them quick here.
There's even one on eBay.

Mine was sturdy and well-built, had no problems with raises and lowers that couldn't be tuned, but the weakest spot are the knee levers. The occasional weekend gig, yeah, but hours over days and weeks....
But even that can be modified; several guys say including me that the levers are a little short. I found the pedals close together. But in retrospect, I should've kept it until I got all you can get out of this basic guitar, which has to be the best buy of used steels, and maybe even new ones.
View user's profile Send private message Send e-mail
J Hill

 

From:
Colorado, USA
Post  Posted 3 Jun 2006 2:29 pm    
Reply with quote


I started out on one and it was excellent, in fact the neck/strings are great. My teacher (a pro...) says its good enough to gig with. When he plays it, it sounds as good as his pro-model. Somebody must have gotten a lemon, that can happen with anything. The pro-models have smoother pedal and knee-lever action and are heavier. Again, the neck/strings are great, tight and steely. Yea, it stays in tune. Its a sweet little guitar.

View user's profile Send private message Send e-mail
Calvin Walley


From:
colorado city colorado, USA
Post  Posted 3 Jun 2006 3:39 pm    
Reply with quote

you could put a cigar box with string's on it in the hands of someone like Bobbie seymore or Bobby Bowman and they can make it sound beautiful ...with that said not all student models are created equal. having had a carter starter from my own experence it is not the best student model for a rank beginer to start with.
Zum makes (or did make ) a great student model and i am sure there are others

------------------
Mullen SD-10
View user's profile Send private message Send e-mail
Kenny Brown


From:
Auburn, Alabama, USA
Post  Posted 3 Jun 2006 8:44 pm    
Reply with quote

I have played a Carter Starter and it doesnt sound bad at all. I'm currently playing and gigging with an older GFI student model and it works great as well.

I believe with the student models serve their purpose for what they are--an inexpensive avenue to enter the world of pedal steel to find out if one wishes to continue on to a "pro" model steel.

One cannot compare the student steel guitar with a pro steel.

I also have a little Artisan lap steel, and later picked up a Remington Playboy lap steel. You just cant compare the two. It's like driving your grandpa's old clunker truck on the interstate as opposed to driving a brand new Caddy.


I believe the student playing the "student" model steel has everything to do with one's journey.


I know speaking for myself...I will be playing a "pro" model soon.


Nothing wrong with beginning on a guitar that is less expensive to be certain it is what you would like to do.


View user's profile Send private message
Calvin Walley


From:
colorado city colorado, USA
Post  Posted 4 Jun 2006 6:06 am    
Reply with quote

to me it seemed that on the student models (for lack of a better word) i was fighting the guitar and even more so on the carter
maybe i just had a bad one ..i don't know but i do know i almost gave up because of it . the student Zum was a much easier to play guitar it ( to me ) was simply the better guitar of the 3 that i had ( once had a sho bud mavrick )

------------------
Mullen SD-10
View user's profile Send private message Send e-mail
Bobby Lee


From:
Cloverdale, California, USA
Post  Posted 4 Jun 2006 7:14 am    
Reply with quote

quote:
Remeber the changes on this steel are welded in.
There is no making different copedent ideas a reality.

That's actually a good idea for beginners. I wish that my first pedal steel had been welded to a standard 3+4 copedent. I would have spent a lot more time playing and lot less time tinkering with experimental tunings and changes.

------------------
Bobby Lee (a.k.a. b0b) - email: quasar@b0b.com - gigs - CDs, Open Hearts
Williams D-12 E9, C6add9, Sierra Olympic S-12 (F Diatonic)
Sierra Laptop S-8 (E6add9), Fender Stringmaster D-8 (E13, C6 or A6)   My Blog
View user's profile Send private message Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron