| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Power supply/Please close, thanks Keith!
This topic is locked: you cannot edit posts or make replies.
Author Topic:  Power supply/Please close, thanks Keith!
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 3 Feb 2020 6:31 am    
Reply with quote

Have an older Hilton volume pedal(nearly 20 years old) that was severely distorting the output signal. Tried turning the output control down to where it was barely passing the signal with no result. Sent it to Keith for repair and the unit was returned with the output control completely removed but still exhibiting the same problem. Here is my question: Could it possibly be a faulty or failing power supply? Reason for asking; neglected to change the 9V battery in my Goodrich 'Omni' pedal before a job and when the battery became weak the pedal developed the exact symptoms as the Hilton, changed the battery and problem solved. Would anyone know of a suitable substitute for the factory 12V supply? Attempted to source an exact replacement but was only able to locate a used unit that was listed for sale on ebay in Texas. Have reached out to Keith through emails and Forum p.m.'s but as yet have received no response. Any help would be appreciated, thank you.

Last edited by David Nugent on 6 Feb 2020 4:04 pm; edited 1 time in total
View user's profile Send private message
Jack Stoner


From:
Kansas City, MO
Post  Posted 3 Feb 2020 7:17 am    
Reply with quote

I have a replacement "OMNIHIL" for the Phihong PSM11R-120. Works with my 12VDC Hilton.

https://www.amazon.com/Omnihil-Adapter-Compatible-PSM11R-120-Replacement/dp/B017OKKQA2
View user's profile Send private message Send e-mail
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 3 Feb 2020 8:24 am    
Reply with quote

Jack..Thanks so much for the reply and the link, will order one today.
View user's profile Send private message
Ronald Ballister

 

From:
New York, New York, USA
Post  Posted 5 Feb 2020 6:59 am    
Reply with quote

I'm a little bit confused Jack. I have an older Hilton Pedal. The output is 24v not 12v. I believe Keith later changed the power supply so you could use a 9v power supply.
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 5 Feb 2020 7:16 am    
Reply with quote

There have been several versions.

The older models (and what David has as I later found out) uses the attached (Motorola) power supply that is both +12VDC and -12VDC. The Motorola also has a 5VDC that is not used. This power supply was originally for telephone systems.

The first detachable version, and what I have, uses the single 12VDC power supply

Later, current model, uses a 24VDC power supply.

The "Pro" model which is for 6 string guitar players uses 9VDC.
View user's profile Send private message Send e-mail
Jerry Roller


From:
Van Buren, Arkansas USA
Post  Posted 5 Feb 2020 9:57 pm    
Reply with quote

You should phone Keith.
Jerry
_________________
http://www.littleoprey.org/
View user's profile Send private message Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 6 Feb 2020 5:57 am    
Reply with quote

You can get the Phihong supplies online through Mouser Electronics and others. I just ordered my 5th one as a spare. I have had 3 fail. 2 on outside gigs that were about a year apart at the same exact place. The 3rd was at rehearsal about a month ago.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 6 Feb 2020 7:13 am    
Reply with quote

Jerry..Have attempted to contact Keith on more than one occasion both through Forum P.M. and emails via his website, as yet no response. Very surprised that he has not noticed this post..Richard..My volume pedal has the large, hardwired Motorola power supply that apparently is no longer available. Attempted to source a replacement but was only able to locate a used unit in Texas and did not wish to risk purchasing a defective product (@$30.00 plus shipping!)...Thank you both for the replies.
View user's profile Send private message
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 6 Feb 2020 8:26 am    
Reply with quote

David Nugent wrote:
Jerry..Have attempted to contact Keith on more than one occasion both through Forum P.M. and emails via his website, as yet no response. Very surprised that he has not noticed this post..Richard..My volume pedal has the large, hardwired Motorola power supply that apparently is no longer available. Attempted to source a replacement but was only able to locate a used unit in Texas and did not wish to risk purchasing a defective product (@$30.00 plus shipping!)...Thank you both for the replies.


Ah! There should be another power supply available with the same specs available somewhere. What is the model number and specs off the power supply. I can find almost anything on the internet.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Keith Hilton

 

From:
248 Laurel Road Ozark, Missouri 65721
Post  Posted 6 Feb 2020 8:28 am    
Reply with quote

David, Jerry Roller called me and made me aware of this post. To help you I need to understand the problem you are having. I need you to contact me either by e-mail or telephone. If have not been able to contact me you may have been using some really old e-mail or old phone number that is no longer working. David, here is my e-mail hiltonkeith43@gmail.com Here is my phone number 417-581-4158. My email and phone both are working and I would like to help you.
View user's profile Send private message Send e-mail Visit poster's website
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 6 Feb 2020 4:03 pm    
Reply with quote

Please close, Mr. Hilton has solved the problem.
View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron