| Author |
Topic: How to adjust Emmons111 force compensater? |
Ron Pruter
From:
Arizona, USA
|
Posted 8 May 2019 8:23 pm |
|
Would anyone be willing to share a copy of how to adjust the reverse force, anti-cabinet drop system in a Legrande111? Is it printed on any manual? Thanks, Ron
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
 |
Bob Hoffnar
From:
Austin, Tx
|
Posted 8 May 2019 10:28 pm
|
|
If it is already in the ballpark you can fine tune by picking the 4th string then pushing your a pedal. If the E goes sharp then loosen the travel of th counter force rod with the rod collar so it doesn’t pull as much. If it goes flat then tighten the rod collar.
I can talk you through it via Skype if you want. It’s pretty easy once you know what is going on.
_________________
Bob |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 10 May 2019 7:56 am Emmons Counterforce Instruction Sheet
|
|
Hi guys,
Here is the official Emmons Counterforce instruction sheet.
When this system is adjusted properly it works very well!
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Ron Pruter
From:
Arizona, USA
|
Posted 12 May 2019 11:32 am
|
|
Thx Bob and Lynn. RP
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
