| Author |
Topic: *No Knee Levers* Pedal recommendations? |
Peter
|
Posted 19 May 2006 12:04 am |
|
What pedal arrangement would you create on E9th if there are no Knee Levers?
Standard ABC pedals are already there. (Plus another 5 for the C6th neck)
Would you use the 4th pedal to replicate the E lever?
Where would this 4th pedal be to get the E lever and B pedal combination?
For instance ABCE? Or EBAC?
What else?
Maybe use the 5th pedal as well?
I am asking this to make a decision whether I should add knee levers on a Fender1000 or not.
(The bottom of the deck has 74 holes in it from previous installations, so I am not too worried about vintage value)
------------------
Peter den Hartogh
1978 Emmons S10 P/P; 1977 Sho-Bud D10 ProIII Custom;
1975 Fender Artist S10; Remington U12; 1947 Gibson BR4;
|
|
|
 |
Tony Prior
From:
Charlotte NC
|
Posted 19 May 2006 2:49 am
|
|
of course Raising and lowering 4 and 8 are very common knee lever choices..
I believe the issue is more of physical location rather than just having it..or what pulls should I add..
"A" Pedal along with 4 + 8 Raise.."B" Pedal along with 4 + 8 lower..
these physical considerations I think are more geared to the issue .
------------------
------------------
TPrior
TPrior Steel Guitar Homesite
|
|
|
|
Peter
|
Posted 19 May 2006 3:03 am
|
|
Thanks Tony, that kind of answer is exactly what I am looking for.
Anyone else with more ideas?[This message was edited by Peter on 19 May 2006 at 04:25 AM.] |
|
|
|
Wayne D. Clark
From:
Montello Wisconsin, USA
|
Posted 19 May 2006 3:28 pm
|
|
Peter, I realy don't have an answer to your question but the other morning I was thinking if pedals were installed to replace the two kneelevers that raise and lower the 4th and 8th strings where would I put them and in relation to the A,B,&C pedals would they be practical since most of us are using only one foot to activate pedals A,B & C. It may be that they would follow the C pedal like E pedal & F pedal. I am sure there are answers yet to come on this. I would be supprised if some one has not figured this out. I'll keep checking on this thread to see what type of answers and suggestions come up. Good Question Peter.
Wayne
MSA D10 8/2 |
|
|
|
Larry Strawn
From:
Golden Valley, Arizona, R.I.P.
|
Posted 19 May 2006 3:58 pm
|
|
Peter,
Tony is right.
I think you may want to think more along the lines of knee levers.
Looks to me like you would have to use both feet for what you are wanting here.
Larry
------------------
"Fessy" S/D 12, 8/6 Hilton Pedal, Sessions 400 Ltd. Home Grown E/F Rack
"ROCKIN COUNTRY"
[This message was edited by Larry Strawn on 19 May 2006 at 05:00 PM.] |
|
|
|
John Bechtel
From:
Nashville, Tennessee, R.I.P.
|
Posted 19 May 2006 9:25 pm
|
|
If you decide to use two-feet, start at the other end, after #1, #2 & #3, by using at least 1/2 of the loop on pedal #8. (?????)
------------------
“Big John”
a.k.a. {Keoni Nui}
Current Equipment
|
|
|
|
