Author |
Topic: Which push pull would you choose |
Johnie King
From: Tennessee, USA
|
Posted 14 Apr 2019 4:17 pm
|
|
What’s the most preferred Push Pull an why.
Bolt on wrap around cut tail or later models. Red Belly
black belly or brown belly?
Last edited by Johnie King on 2 Sep 2019 10:22 am; edited 1 time in total |
|
|
|
Erv Niehaus
From: Litchfield, MN, USA
|
Posted 15 Apr 2019 7:15 am
|
|
A wrap around is the most coveted Emmons and a metal neck bolt on comes in a close second.
Erv |
|
|
|
Earnest Bovine
From: Los Angeles CA USA
|
Posted 15 Apr 2019 9:03 am
|
|
What kind is this?
|
|
|
|
Erv Niehaus
From: Litchfield, MN, USA
|
Posted 15 Apr 2019 9:12 am
|
|
That's a cut tail.
Erv |
|
|
|
Jack Hanson
From: San Luis Valley, USA
|
Posted 15 Apr 2019 10:34 am
|
|
Personally, I'm perfectly happy with the three I already have: A '73 rosewood 'mica D-10 fatback cut-tail, and a coupla hot-rodded '70s GS-10s (one is a sunburst lacquer, and the other one is the notoriously butt-ugly bowlin' ball 'mica).
I've been playing that same D-10 since '77, and it's more guitar than I'll ever need. |
|
|
|
Mike DiAlesandro
From: Kent, Ohio
|
Posted 15 Apr 2019 4:46 pm
|
|
I chose this one
|
|
|
|
Andy DePaule
From: Saigon, Viet Nam & Springfield, Oregon
|
Posted 15 Apr 2019 5:09 pm The only Push Pull PSG I've ever had
|
|
The only Push Pull PSG I've ever had and still have is this Promat D-10, 8&4.
I think this is called a Cut Tail?
Was in rough & unplayable condition when I received it, but it was gone over last year by Lynn Stafford in Portland and is now like new.
Plays very well and has great tone and incredible sustain.
My only issue is the second string half stop is not very solid feeling.
Not a big deal because I don't play out with it and keep it in the US for one to play when I'm there.
I can't compare it to an Emmons since I have no real experience playing them.
Other Emmons players who have played this seem to think it's as good or better.
Lynn mentioned that it has stainless steel fingers so a little different tone than an Emmons would have.
I'd like to put a flag on the RKR because it's just a tad too far forward for my sitting position. Would also like to change the function of that lever... Maybe later?
ps. To the original questions, I prefer my girlfriends belly. Soft and kind of tan color!
This photo was from the Promat web site which no longer exists.
_________________ Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project. |
|
|
|
Dustin Cook
From: California
|
Posted 15 Apr 2019 5:56 pm You can’t go wrong
|
|
I have a 67 cut tail a few numbers from “the Blade†and a 66 bolt on. Each has it’s own tone, the cut tail is sweet, the bolt on is bold, deep and punchy. Its tough to beat a good PP. |
|
|
|
Larry Moore
From: Hampton, Ga. USA
|
Posted 16 Apr 2019 2:01 am Emmons # 1153-D
|
|
Here is my PP D-10 8-5 Sn # 1153-D 1967
I also have the smaller S-10 3-4 Sn # 1109-S 1967
Both stay in tune good & the E-9th necks are set the same.
Larry |
|
|
|
Steven Paris
From: Los Angeles
|
Posted 16 Apr 2019 2:15 am
|
|
Jack Hanson wrote: |
Personally, I'm perfectly happy with the three I already have: A '73 rosewood 'mica D-10 fatback cut-tail, and a coupla hot-rodded '70s GS-10s (one is a sunburst lacquer, and the other one is the notoriously butt-ugly bowlin' ball 'mica). I've been playing that same D-10 since '77, and it's more guitar than I'll ever need. |
Watch what you're callin' UGLY, PAL!! Just because you have the prettiest (sunburst) GS-10 on the planet don't mean you gotta dis the others! I happen to think that brown mica GS-10s are quite nice, thank you!! _________________ Emmons & Peavey |
|
|
|
Erv Niehaus
From: Litchfield, MN, USA
|
Posted 16 Apr 2019 6:57 am
|
|
Black sounds better.
Erv |
|
|
|
Jack Hanson
From: San Luis Valley, USA
|
Posted 16 Apr 2019 8:22 am
|
|
Steven Paris wrote: |
I happen to think that brown mica GS-10s are quite nice, thank you!! |
I stand behind my opinion that the common "bowlin' ball" 'mica is butt-ugly. Big Ron musta found a deal on a pallet-load of that stuff back in the day, because there's certainly no shortage of bowlin' ball Gee Esses. I've never seen a pro-model cladded with that 'mica -- likely for good reason.
I will concede however, that, even with its mildly microphonic pickup, my 3 x 1 "bowlin' ball" #278 GS is arguable the best sounding of the three old Emmons push/pulls I have. So, I will agree it's "quite nice." It's just ugly. |
|
|
|
Jack Hanson
From: San Luis Valley, USA
|
Posted 16 Apr 2019 8:32 am
|
|
Erv Niehaus wrote: |
Black sounds better.Erv |
My old "bowlin' ball" 'mica GS-10 has a black BR-10 neck on it. It sounds pretty good. Does that count?
Photo courtesy of Clem Schmitz |
|
|
|
Dustin Cook
From: California
|
Posted 16 Apr 2019 8:49 am Here's the cut tail
|
|
8x7 has some of the sweetest overtones I've heard from a PP
|
|
|
|
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 16 Apr 2019 9:07 am Re: Here's the cut tail
|
|
Dustin Cook wrote: |
8x7 has some of the sweetest overtones I've heard from a PP |
Hi Dustin,
As you probably remember, I was reluctant to let it go but I'm glad to hear you're still enjoying this guitar. _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Dustin Cook
From: California
|
Posted 16 Apr 2019 9:30 am Thanks to Lynn
|
|
Yes my friend, after years of owning countless modern steels (I'm not looking to start an off topic argument), I fell in love with two old PP's, and you were very gracious in setting me up with the 67 and the 66. I still own both, and they will never be sold while I have blood in my veins. I must also mention, that I am not religious about changing strings, as a matter of fact I'm awful. However, I have yet to break one string prematurely on either of them. I play out about 4 hrs per week. I actually did a test, to see how long I could go, and after 1 year of no string breakage, I had to change them, strings were just dead. |
|
|
|
Mark Robinson
From: North Carolina, USA
|
Posted 16 Apr 2019 11:23 pm
|
|
Larry, that ‘67 S10 looks very nice.
Last edited by Mark Robinson on 17 Apr 2019 10:29 am; edited 1 time in total |
|
|
|
Mark Robinson
From: North Carolina, USA
|
Posted 16 Apr 2019 11:27 pm
|
|
Although I've never played a wraparound, I love the sound and action of this guitar.
Last edited by Mark Robinson on 17 Apr 2019 10:29 am; edited 1 time in total |
|
|
|
Steven Paris
From: Los Angeles
|
Posted 17 Apr 2019 1:13 am
|
|
Erv Niehaus wrote: |
A wrap around is the most coveted Emmons and a metal neck bolt on comes in a close second.
Erv |
Why do you suppose that is, exactly? Do they SOUND better? What makes the difference? _________________ Emmons & Peavey |
|
|
|
Erv Niehaus
From: Litchfield, MN, USA
|
Posted 17 Apr 2019 7:49 am
|
|
I think scarcity drives the interest and price up.
We always want what we can't have.
Erv |
|
|
|
scott murray
From: Asheville, NC
|
Posted 18 Apr 2019 1:31 pm
|
|
Buddy Emmons seemed to think the wraparound design had the best tone of them all. do we know how many were made? _________________ 1965 Emmons S-10, 3x5 • Emmons LLIII D-10, 10x12 • JCH D-10, 10x12 • Beard MA-8 • Oahu Tonemaster |
|
|
|
Larry Moore
From: Hampton, Ga. USA
|
Posted 18 Apr 2019 1:47 pm
|
|
Thanks Mark....My dear friend Mr. Charlie Ward did the work on this steel not long before he passed away.
He wanted me to use this one to advertise for him. Charlie did a very good job on it, the under side looks show room new filled all screw hole and refrocked new black all pulls are straight he was a very good at doing PP's.
|
|
|
|
Mark Robinson
From: North Carolina, USA
|
Posted 18 Apr 2019 4:36 pm
|
|
Larry Moore wrote: |
Thanks Mark....My dear friend Mr. Charlie Ward did the work on this steel not long before he passed away.
He wanted me to use this one to advertise for him. Charlie did a very good job on it, the under side looks show room new filled all screw hole and refrocked new black all pulls are straight he was a very good at doing PP's.
|
Larry, you’re welcome.
Charlie put a LKV on my LeGrand ll for me. I’ll never forget him as he was an eccentric individual. I visited him several times in Arden. He was a master steel guitar mechanic.
If you ever think you want to get rid of that D10 bolt on, please let me know. No other sounds compare! ðŸ˜
Mark |
|
|
|
Mark Robinson
From: North Carolina, USA
|
Posted 18 Apr 2019 4:39 pm
|
|
scott murray wrote: |
Buddy Emmons seemed to think the wraparound design had the best tone of them all. do we know how many were made? |
Agreed, Scott. Wraparounds sound great! |
|
|
|
Jim Hussey
From: Reno, Nevada - USA
|
Posted 18 Apr 2019 6:18 pm
|
|
I've been blessed to have a wrap, a metal bolt on, and a cut tail. I've gigged all 3. They all are fantastic guitars on all fronts. But hands down the wrap is the go to guitar. That said, from the standpoint of playability, there seems to be a difference between early wraps and later wraps. In the end, I agree with Erv: the wrap first, the metal bolt on second, and then the cut tail. |
|
|
|