| Author |
Topic: Dunlop Super Pot, Split Shaft, 500K-ohm - DSP500K |
Greg Lambert
From:
Illinois, USA
|
|
|
 |
Bill A. Moore
From:
Silver City, New Mexico, USA
|
|
|
|
Mike Bacciarini
From:
Arizona
|
Posted 18 Mar 2019 3:55 pm |
|
I used Tom Bradshaw's 470K pot in my Ernie Ball VPJR and it installs and works great. It's a long plain shaft with no gear, so you just use the EB pulley.
https://www.songwriter.com/bradshaw/potentiometers.php
_________________
MCI Arlington S-10 3+5, George L E-66, BJS & Emmons bars, Fender Princeton 65W, Fender Satellite SFX, custom FX rack, 1983 Dobro 60D, SX-8 lap steel, Martin D16GT, Ibanez AS73, 1978 Rickenbacker 4000 custom. |
|
|
|
Michael Maddex
From:
Northern New Mexico, USA
|
Posted 18 Mar 2019 3:59 pm
|
|
Mike posted while I was typing. Tom has good stuff. I wanted to say that I believe that you can get a better price and customer support here than you will with Amazon:
https://www.tubesandmore.com/products/potentiometers_0?filters=Brand%3DDunlop
HTH. Good Luck with the Project! 
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke |
|
|
|
Greg Lambert
From:
Illinois, USA
|
Posted 18 Mar 2019 5:22 pm
|
|
Thanks Michael , those prices are a lot better. |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 19 Mar 2019 6:52 pm
|
|
So I need 3 pots for my Goodrich pedals.
Which do I need please?
Solid shaft?
Split shaft?
Tapered Shaft?
500K
10% resistance.
Does it have to be a Dunlop?
Please advice. I need these pretty quick.
One is scratchy
One appears to be distorting
The other one is a backup but needs a string.
I also need a roll of the string that is used to repair these.
Does anyone know where to get a roll of the stuff? |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 19 Mar 2019 6:58 pm
|
|
| I just read that braided masons cord works great. |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 19 Mar 2019 9:44 pm
|
|
Discarded mini-blind cord if very good. Before you throw that bad blind away cut the string off of it.
_________________
http://www.littleoprey.org/ |
|
|
|
Bob Hoffnar
From:
Austin, Tx
|
Posted 20 Mar 2019 7:14 am
|
|
David,
Check your private messages. I bought a 5 pack so I could have backup and the new Goodrich pots don't seem to wear out.
_________________
Bob |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 20 Mar 2019 7:46 am
|
|
I bought the pots last night. Thx for the info everyone.
$42.00 tax in for (2) shipping was $4.50. Cheaper than Amazon with free shipping.
I have a roll of masons braided line so I’m going to rebuild them myself.
Wish me luck. Ha ha. |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 20 Mar 2019 9:33 am
|
|
A braided, waxed shoe string, made for men's dress shoes, also works well on a volume pedal.
Usually available in black and brown!
_________________
Lee, from South Texas - Down On The Rio Grande
There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.
Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat |
|
|
|
Larry Dering
From:
Missouri, USA
|
Posted 24 Mar 2019 5:29 am
|
|
| David, how did the pots work out? Any issues? |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 24 Mar 2019 8:43 am
|
|
Just got them yesterday.
Might take me a few days to get them installed.
Thx for checking. |
|
|
|
