| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic My new Harden Engineering lap steel
Reply to topic
Author Topic:  My new Harden Engineering lap steel
Noah Miller


From:
Rocky Hill, CT
Post  Posted 8 Feb 2019 7:57 am    
Reply with quote

I usually stick with vintage steels, but none in my collection really fit my new group's sound. I was looking for an 8-stringer that could do both clean and dirty rock tones, so I decided to go for a custom build. I was aware of Harden Engineering from the guitar world, and when I discovered that Bill Harnden also did steels, I decided to drop him a line. The result was affordably priced and sounds exellent:







I know a lot of you are going to instantly notice the slanted bridge. When I first unwrapped the instrument I was dismayed to see it, but once I tuned it up... actually, the intonation is just fine. I've checked it up and down the fretboard, and it sounds best with the bar perfectly parallel to the frets. Perhaps I'm putting more pressure on the bass strings without realizing it.

The body is made of two slabs of mahogany glued together; the seam is visible around the sides. The headstock is a separate piece of mahogany with a maple veneer, and it's glued into a recess in the body under the fretboard. It's covered in a satin finish. The nut and bridge are solid aluminum, as are all the stamped & etched plates that adorn various parts of the instrument (including the control cavity cover and the jack plate). There are non-slip pads on the back.

The pickup is the same single-coil design used in may of Harden's guitars. It's the size of a P90, but it sounds more like the oval pickups used in late '40s Gibson steels: thick and creamy, with plenty of mids, smooth highs, and a touch of compression. It gains an exceptional bite through an overdriven amp though, and the output is moderate so it doesn't become muddy. The steel has very good sustain, especially considering its light weight.
View user's profile Send private message Send e-mail
Brooks Montgomery


From:
Idaho, USA
Post  Posted 8 Feb 2019 8:08 am    
Reply with quote

really cool vintage look!
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 8 Feb 2019 8:30 am    
Reply with quote

That is a nice looking guitar Noah. I'm pretty new to this. Why do manufacturers skew the bridge?
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Chris Walke

 

From:
St Charles, IL
Post  Posted 8 Feb 2019 8:35 am    
Reply with quote

Eye-catching! Love it.

I notice that sometimes I'm likely to run sharp on the bass side strings (bar pressure issue?). That slanted bridge would likely help me.
View user's profile Send private message Send e-mail
Godfrey Arthur

 

From:
3rd Rock
Post  Posted 8 Feb 2019 9:39 am    
Reply with quote

Me Likey! Very Happy
_________________
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7
View user's profile Send private message
Noah Miller


From:
Rocky Hill, CT
Post  Posted 8 Feb 2019 9:58 am    
Reply with quote

Bill Groner wrote:
That is a nice looking guitar Noah. I'm pretty new to this. Why do manufacturers skew the bridge?


It's the norm in the guitar/mandolin/etc. world to have an angled or compensated bridge because different string gauges bend by different amounts when you fret them. In order to play in tune up a guitar's fretboard, a the bass strings typically need to have a slightly longer scale than the treble strings. That's theoretically not an issue on steels, because the bar should be bending all the strings by the same amount. Guitar builders who occasionally venture into lap steels may be unaware of this difference.
View user's profile Send private message Send e-mail
Andy Volk


From:
Boston, MA
Post  Posted 8 Feb 2019 9:58 am    
Reply with quote

Unique, cool vibe but why the slanted bridge? Doesn't it make playing harmonics in a straight line impossible?
_________________
Steel Guitar Books! Website: www.volkmediabooks.com
View user's profile Send private message Send e-mail Visit poster's website
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 8 Feb 2019 10:25 am    
Reply with quote

Andy Volk wrote:
Unique, cool vibe but why the slanted bridge? Doesn't it make playing harmonics in a straight line impossible?


I guess that was kind of my question. I thought nut to 12th, and 12th to bridge should be equal distance??

_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Michael Greer


From:
Ontario, Canada
Post  Posted 8 Feb 2019 2:18 pm    
Reply with quote

Noah

Very cool looking lap steel....I really like the etched metal accent pieces



Mike
View user's profile Send private message
Robert Sands

 

From:
New Jersey, USA
Post  Posted 10 Feb 2019 3:43 am    
Reply with quote

I would love for you to post a video or sound file of you playing this steel. I’ve thought about this builder making me a 6 string steel for blues playing and would really like to hear how his steels sound. Love the design.
View user's profile Send private message Send e-mail
Jim Schofield

 

From:
Northern Territory, Australia
Post  Posted 10 Feb 2019 4:00 am    
Reply with quote

Some inspiring decorative etching there.
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 10 Feb 2019 5:10 am    
Reply with quote

Nice looking guitar but, like a few others here, I'm not convinced by the slanted bridge. But if it works then it's all good.
View user's profile Send private message Send e-mail
Noah Miller


From:
Rocky Hill, CT
Post  Posted 10 Feb 2019 6:06 am    
Reply with quote

Here's a clip.
View user's profile Send private message Send e-mail
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 10 Feb 2019 6:10 am    
Reply with quote

Sounds nice Noah.
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Robert Sands

 

From:
New Jersey, USA
Post  Posted 10 Feb 2019 6:20 am    
Reply with quote

Thanks for the clip. Sounds good.
View user's profile Send private message Send e-mail
Per Berner


From:
Skovde, Sweden
Post  Posted 12 Feb 2019 4:16 am    
Reply with quote

The fret spacing looks a bit random...
View user's profile Send private message Send e-mail Visit poster's website
Jim Schofield

 

From:
Northern Territory, Australia
Post  Posted 16 Feb 2019 6:58 pm    
Reply with quote

It does look a bit wrong Per, now that you have pointed it out.
View user's profile Send private message Send e-mail
Paul Honeycutt

 

From:
Colorado, USA
Post  Posted 27 Feb 2019 5:50 pm    
Reply with quote

That sounds nice and looks cool. If the bridge works, what's not to like?
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron