| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Which neck (T-8) for more- or less-used tunings?
Reply to topic
Author Topic:  Which neck (T-8) for more- or less-used tunings?
Mike Harris

 

From:
Texas, USA
Post  Posted 2 Feb 2019 7:39 am    
Reply with quote

About to string up a T-8 for the first time. I have one tuning I know best and a couple that will be new/experimental. Is there a general rule as to where to put your regular/standby tuning and where to put the one(s) you use less frequently? I've never much played one with legs so I don't know if I'll be standing or sitting more, if that matters.

As always, any input appreciated.
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 2 Feb 2019 12:40 pm    
Reply with quote

I've always put my most used tuning (A6 in my case) on the neck closest to me. On Stringmasters, I've found that the closest neck usually has the strongest tone/volume with the other necks slightly thinner sounding. Also, because of something to do with impedence that I don't understand, if I use a volume/tone pedal, the tone sweep effect is much stronger on the nearest neck and weakest (almost to the point of doing nothing) on the furthest neck. I have found this to be true on a double, triple and quad Stringmaster as well as a Dual Pro and Custom Triple (the older trapezoid models). So all of 'em have A6 on the neck closest to me.

Last edited by Jeff Mead on 2 Feb 2019 2:51 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Mike Harris

 

From:
Texas, USA
Post  Posted 2 Feb 2019 1:08 pm    
Reply with quote

That's interesting about proximity and tone. My natural inclination was that the nearer neck would be the go-to one for convenience and access to the tone and volume pots, but I thought there might be something about ergonomics that dictated otherwise. I'm checking out a few good players on youtube and they seem to be gravitating towards the near one. Thanks, Jeff.
View user's profile Send private message Send e-mail
Joe Elk


From:
Ohio, USA
Post  Posted 2 Feb 2019 1:29 pm    
Reply with quote

In my opinion, I think it depends on what you used too do in terms of a double neck.
But 3 or 4 necks would probably be different.
Joe Elk Central Ohio
View user's profile Send private message Send e-mail
Mike Harris

 

From:
Texas, USA
Post  Posted 2 Feb 2019 2:20 pm    
Reply with quote

Thanks, Joe--I'm coming from a single so it's a whole new ball game at this point.
View user's profile Send private message Send e-mail
Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 4 Feb 2019 5:53 pm    
Reply with quote

I honestly don't know how exactly this affects tone but consider the Stringmaster design...each neck gets progressively thicker. I'd have to think that affects things in some way...good or bad. I'm a relative newbie, so I'm not drawing on any rich tradition but I keep my most comfortable tuning in front and then the odder ones as you move back from the front neck. Just personal preference.

For me, it's, from near to far, C13 (my "comfortable" tuning), then B11 (kind of foreign but useful for a good handful of songs I play), then "miscellaneous", which I think is E13 presently, has been A6 and threatens to be a baritone neck every now and again...
_________________
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me
View user's profile Send private message Send e-mail
Jeff Mead


From:
London, England
Post  Posted 5 Feb 2019 1:35 am    
Reply with quote

Nic Neufeld wrote:
I honestly don't know how exactly this affects tone but consider the Stringmaster design...each neck gets progressively thicker. I'd have to think that affects things in some way...good or bad. I'm a relative newbie, so I'm not drawing on any rich tradition but I keep my most comfortable tuning in front and then the odder ones as you move back from the front neck. Just personal preference.

For me, it's, from near to far, C13 (my "comfortable" tuning), then B11 (kind of foreign but useful for a good handful of songs I play), then "miscellaneous", which I think is E13 presently, has been A6 and threatens to be a baritone neck every now and again...


I agree that the neck thickness probably contributes something but it doesn't make nearly as much difference as the wiring in my opinion.

And so we don't get confused, most people call the "front" neck the one nearest the audience (the Fender logo is on the front). So I'd say your C13 is actually on the back neck (the one nearest you).
View user's profile Send private message Send e-mail
Nic Neufeld


From:
Kansas City, Missouri
Post  Posted 6 Feb 2019 4:02 pm    
Reply with quote

Jeff Mead wrote:

And so we don't get confused, most people call the "front" neck the one nearest the audience (the Fender logo is on the front). So I'd say your C13 is actually on the back neck (the one nearest you).


Thanks...that's a good clarification, and makes sense! You're right, I meant the "near" neck.
_________________
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron