Author |
Topic: Bill Lawrence XR-16 split coil wiring |
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 10 Jan 2019 7:32 am
|
|
I put a BL XR-16 in my Mullen SD12, and want to put a switch in to switch from humbucker to single coil. I can't find the wiring diagram I had to do this. The pickup has a black, white, and red wire (which I believe is the split wire).
Can someone help?
Thanks _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Chris Reesor
From: British Columbia, Canada
|
Posted 10 Jan 2019 3:48 pm
|
|
Just temporarily connect the red to ground, Richard.
Then touching the polepieces with some magnetic metal item will tell you which coil is still active; you will hear the click through your amp. You may be able to turn the pickup around to get the active coil either closer or further from the changer fingers, whichever sound you prefer. If this works out, then a simple SPST mini toggle switch that connects/disconnects the red wire to ground will get 'er done.
Good luck and happy picking. _________________ Excel Superb U12, MIJ Squier tele, modified Deluxe Reverb RI, Cube 80XL, self built acoustics & mandolins |
|
|
|
Richard Sinkler
From: aka: Rusty Strings -- Missoula, Montana
|
Posted 11 Jan 2019 6:31 am
|
|
Thanks Chris. I'll give that a shot. _________________ Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|