| Author |
Topic: Telonics Pedal problems |
Pete Nicholls
From:
Macon, Georgia, USA
|
Posted 24 Nov 2018 6:56 am |
|
My Telonics pedal has started cutting in and out when using it. Sounds like a bad connection, but all exterior connections seem fine. Not knowing what exactly is under the hood, thought I would ask here if there are any suggestions.
Thanks in advance.
_________________
Justice The Judge SD-10, 2007
Justice Pro Lite SD-10, 2011
Quilter Steelaire
Quilter Labs Tone Block 202 Head
Roland Cube 80-XL
American Stratocaster - Yamaha Bass Guitar
1 Fender Telecaster Nashville Edition
Ham Call: N4BHB |
|
|
 |
Bill Ferguson
From:
Milton, FL USA
|
Posted 24 Nov 2018 7:11 am
|
|
Pete, there are no user servicable part inside.
Call Telonics and talk to Dave or Sophie.
They will take care of your problem ASAP.
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Randy Owens
From:
West Central Indiana, USA
|
Posted 24 Nov 2018 10:23 am
|
|
I caught mine doing the same thing. In my case, that twist lock power connector was unlocking itself. It seemed to be because the power cable had a twist in it in the same direction that unlocks the plug. Once I got my cable straightened out, the pedal has been perfect.
Keep an eye on your blue light and see if it goes out when you have those audio drop-outs. That'll be your biggest clue.
_________________
2003 Mullen Royal Precision, Walker Stereo Steel, Ampeg G-15, Telonics FP-100 |
|
|
|
gary pierce
From:
Rossville TN
|
Posted 24 Nov 2018 2:51 pm
|
|
| If the light is blinking 2 to 7 pulses when power is on it could be a fault code. |
|
|
|
