| Author |
Topic: Atomic Amplifirebox |
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
 |
Les Cargill
From:
Oklahoma City, Ok, USA
|
Posted 8 Oct 2018 7:50 am |
|
It is good. It's very fiddly once you open the USB connected GUI to it. There's a gain staging GUI-part you have to get right to get the patches to balance.
Not sure it's all that for steel, but for six string it does what ( at least I) would expect. For me at least, the amp itself handles steel and I need a modeller mainly for six string.
I liked it less in the F/X loop than I liked it in front of the amp. The unit "cares" about what level you're sending to it. It seems to ... adapt to the level (?). Not 100% sure about that last bit.
The "Twin" model doesn't do much for me but the "Deluxe" one works well, and the various Marshall patches are fine. You won't actually replace a Plexi with this and a tube amp but it's in the right direction. As with most DI stuff these days, the emphasis in te patches is on more "metal" tones but it offers a good selection of lower gain sounds.
Make sure you have a mechanically secure power connection to it. One night at rehearsal, I had a
loose AC connection to the AC adapter and it sort of "scrambled it's brain".
For the FireBox itself, you will probably need the toggle switches to where you can reach them if you are going to change patches. If you want foot switches to change patches, you'll need the AmpliFire6 or AmpliFire12. They are spendier. They offer MIDI. I prefer the AmpliFireBox because I can keep it on my keyboard. I'm on six string and keys these days...
Make sure you have phantom off if you connect via the XLR. |
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
Posted 10 Oct 2018 8:16 am
|
|
I listened to the clean sounds on the demos and they didn't sound great. It seems to be geared up for stand up guitar. I got the Sansamp para DI which I've used on a few gigs. It's not bad. You have to mix between the DI and the sansamp for the best result, it's very usable. I've been looking at what's available in these amp sims and its a minefield. Kemper is the best by a long shot but I'd like to try a valve pre and a torpedo cab sim. The Kemper is overpriced for a Steel guitar perspective, it's a pity they don't do a less complex model.
Here's a list of the contenders
Kemper
Line6 helix/ pod
Fractal
Boss gt1000
Atomic amplfire range
Two notes preamp andTorpedo cab
Sansamp
Shift line twin
Neunaber Iconoclast
Radial direct drive
Dsm omni cab
Mooer micro amps and radar
AMT cab sim cp100
Digitech cabdry
Palmer pocket
Ethos preamp
Boss fdr
Zoom range
Joyo
Nux
I'm sure there's many more
_________________
https://www.facebook.com/ricknelsteel/
https://www.youtube.com/channel/UChkzP48NKKSiredddt-NGEQ?view_as=public
www.myspace.com/ricknelsteel |
|
|
|
Niklas Widen
From:
Uppsala, Sweden
|
Posted 10 Oct 2018 9:49 am
|
|
I use one frequently for recording and have used it at a couple of no-amp TV gigs. I really like it. I use the deluxe amp model and an EVM12L IR impulse for the cab sim part. I’ve put up a few clips on my instagram account where I use it straight into the audio interface.
https://instagram.com/p/BmTdQl1lw4r/
https://instagram.com/p/BmL1Yc8FVr7/
A big plus is having actual physical knobs for the amp controls. |
|
|
|
John Sluszny
From:
Brussels, Belgium
|
Posted 10 Oct 2018 11:45 am
|
|
| Niklas. WOW ! Is that just the Atomic Ampli-Firebox + its own reverb +one of its amp model +one of its Cab sim ? Nice playing too ! Thanks ! |
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
|
Niklas Widen
From:
Uppsala, Sweden
|
Posted 10 Oct 2018 1:45 pm
|
|
Thanks!
Yes, that's all AF-box.
Deluxe amp model -> short "soft digital" delay -> plate reverb -> cab sim (EVM12L with sennheiser 441) |
|
|
|
John Sluszny
From:
Brussels, Belgium
|
Posted 10 Oct 2018 2:54 pm
|
|
| ðŸ‘😉👠|
|
|
|
Niklas Widen
From:
Uppsala, Sweden
|
Posted 12 Oct 2018 1:41 am
|
|
Here’s another one:
Amplifirebox into a Bose S1 Pro, a nice little rechargable battery powered monitor that weighs only 16 pounds.
https://instagram.com/p/Bn89zo4h_C6/ |
|
|
|
John Sluszny
From:
Brussels, Belgium
|
Posted 12 Oct 2018 2:37 pm
|
|
| Again: ðŸ‘ðŸ‘😉 |
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
|
Niklas Widen
From:
Uppsala, Sweden
|
Posted 17 Oct 2018 1:56 am
|
|
| I think I got my IR package from redwirez.com |
|
|
|
Niklas Widen
From:
Uppsala, Sweden
|
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
|
TRAP TRULY
From:
Mobile , AL
|
Posted 3 Nov 2018 10:37 am
|
|
| Im playing in Casinos that will not allow amps on stage and recently bought the Firebox to run direct to the board. How are you guys importing/downloading different IR cabs from Redwirez? I bought a couple of the amp and speaker IRs but can not import them into the Firebox. This is all new to me and will be something I will have to learn to do. |
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
Posted 4 Nov 2018 11:09 am
|
|
When connected to your computer select cab and click on the cab name. It should give you an option to select from a file. Pick the IR and click choose and it should load. I tried some of the redwirez IRS but found them thin sounding. I think you need to mix them.... as in a bit of front mic with a room mic and a mic from behind the amp. You will need to download an app that does this like the Redwirez one which is $50. I think the twindeluxe cab that can be downloaded from the Atomic website is better than individual IRS from redwirez. Micheal Britt supplied these IRS and they are great.
_________________
https://www.facebook.com/ricknelsteel/
https://www.youtube.com/channel/UChkzP48NKKSiredddt-NGEQ?view_as=public
www.myspace.com/ricknelsteel |
|
|
|
TRAP TRULY
From:
Mobile , AL
|
Posted 5 Nov 2018 7:08 pm
|
|
| Thanks Richard. They are not showing up for some reason. Redwirez' email is down, so no help there. |
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
|
TRAP TRULY
From:
Mobile , AL
|
Posted 11 Nov 2018 1:58 pm
|
|
Richard, I got them to load...operator error.
Redwirez have so many options on their cabinets, it almost overwhelming. I also have tried 3Sigma https://www.3sigmaaudio.com/ with good results as well as Ownhammer https://www.ownhammer.com/store/.
I used the AmplifireBox live this past weekend and although I thought I had it mixed to my liking, it didn't sound great. It still had too much sizzle on the high strings. We also had a bad overall mix. |
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
|
TRAP TRULY
From:
Mobile , AL
|
Posted 11 Nov 2018 5:13 pm
|
|
| That would be great! My preset got deleted when I imported the new IRs. |
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
|
Richard Nelson
From:
Drogheda, Louth, Ireland
|
|
|
|
