| Author |
Topic: Any tips on those sharp string ends? |
Bill McCloskey
|
Posted 24 Dec 2018 1:01 pm |
|
Any one have any great tips about how not to use your nand as a pin cushion everytime you accidentally hit the tuning pegs.
I try crushing the sharp ends down with the end of my bar but I still get stuck every now and then, like two minutes ago. |
|
|
 |
Larry Carlson
From:
My Computer
|
Posted 24 Dec 2018 1:25 pm
|
|
.
Try stop playing songs by "Blood, Sweat and Tears"?
After my 47th finger prick I started cutting them as close to the peg as possible after stringing up.
Then I never go anywhere near the pegs again.
I suppose wearing welding gloves is out of the question...... 
_________________
I have stuff.
I try to make music with it.
Sometimes it works.
Sometimes it doesn't.
But I keep on trying. |
|
|
|
Andy Volk
From:
Boston, MA
|
Posted 24 Dec 2018 2:31 pm
|
|
| Quote: |
| Any tips on those sharp string ends? |
Yes, there are tips. That's the problem. 
You can try using a needle-nose pliers to Bend the tips over on the strings. Another method is to put a drop of super glue on each string end. Make sure to put newspaper under to catch any glue strips before it sets up.
_________________
Steel Guitar Books! Website: www.volkmediabooks.com |
|
|
|
Brooks Montgomery
From:
Idaho, USA
|
Posted 25 Dec 2018 10:45 am
|
|
Haven't tried it, but I'll bet a little pin-head dab of silicone caulk on each end would work.
_________________
A banjo, like a pet monkey, seems like a good idea at first. |
|
|
|
David Matzenik
From:
Cairns, on the Coral Sea
|
Posted 25 Dec 2018 12:30 pm
|
|
Leave about an inch of string beyond the post-winding. Then use pliers to make a neat loop back on itself.
_________________
Don't go in the water after lunch. You'll get a cramp and drown. - Mother. |
|
|
|
Tony Glassman
From:
The Great Northwest
|
Posted 25 Dec 2018 2:32 pm
|
|
| Thread the new string through the tuner post so only a quarter inch is showing, then turn the key so that the string has about 2 or three wraps. Keeping it taut, install the string ball end on the changer finger and tighten so the string while letting the string nestle into roller. Stretch the string and tune to pitch |
|
|
|
Nic Sanford
From:
Oklahoma
|
Posted 25 Dec 2018 7:47 pm
|
|
| What's a changer finger? |
|
|
|
Larry Carlson
From:
My Computer
|
Posted 26 Dec 2018 11:16 am
|
|
| Nic Sanford wrote: |
| What's a changer finger? |
It might be the finger you changed to when tuning the guitar after you pricked
the other one 47 times with a string end and have lost a quart of blood.
_________________
I have stuff.
I try to make music with it.
Sometimes it works.
Sometimes it doesn't.
But I keep on trying. |
|
|
|
L. Bogue Sandberg
From:
Chassell, Michigan, USA
|
Posted 27 Dec 2018 12:48 pm
|
|
I use David Matzenik's method. This is especially important on dobro, for the safety of your band mates.
 |
|
|
|
Tony Glassman
From:
The Great Northwest
|
Posted 27 Dec 2018 2:00 pm
|
|
| Nic Sanford wrote: |
| What's a changer finger? |
It’s in large part, what turns an ordinary lap steel into the “instrument of the gods† |
|
|
|
Nic Sanford
From:
Oklahoma
|
Posted 27 Dec 2018 3:15 pm
|
|
| Oops. I guess the forum index is too complicated for me to read. Sorry, everybody. |
|
|
|
Larry Carlson
From:
My Computer
|
Posted 27 Dec 2018 4:37 pm
|
|
| Nic Sanford wrote: |
| Oops. I guess the forum index is too complicated for me to read. Sorry, everybody. |
No problem.
I am still pushing on the doors at the bank labeled "Pull".
I think they might want to swap the doors for me. I get confused.
_________________
I have stuff.
I try to make music with it.
Sometimes it works.
Sometimes it doesn't.
But I keep on trying. |
|
|
|
