| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Foot Pedal Question - 6th string
Reply to topic
Author Topic:  Foot Pedal Question - 6th string
TravisWright

 

From:
South Carolina, USA
Post  Posted 3 Nov 2018 5:50 pm    
Reply with quote

I bought a used Desert Rose from the forum. Love the guitar, and have enjoyed playing it.

I just changed strings for the first time and put on Ernie Ball Nickel Wound Strings.

The 6th string - G# is having a lot of issues after the string change. It is a 22 wound

The B Pedal is not pulling the G# all the way up to an A. I don't have any issues with the 3rd string G#.

When I tighten the nylon on the end to get it where it needs to be, it will also bring the actual string sharper as well. So anything I do to tighten the change is offset b/c the actual string is tuning as well.

The G# whole step lower on the Franklin pedal is NOWHERE close now either.

I never had any issues with either of these before changing strings.

I'm still a bit of a newbie with playing, and definitely not the handiest from a mechanical standpoint.

Any recommendations? Would this be easily fixed by changing the string gauge for this string? Outside of that, what can I do?

Thanks!
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 4 Nov 2018 8:05 am    
Reply with quote

Did you change the 6th string from a plain string to a wound? If so, that is your problem. You'll have to make adjustments to your guitar to accomodate that change. I'll leave it to more knowledgable people to give you the details.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Ryan Knudson


From:
Milwaukee, Wisconsin, USA
Post  Posted 4 Nov 2018 8:17 am    
Reply with quote

In the case of the 6th string raise not having enough throw, try moving the pull rod out one hole on the bell crank. That should get you the raise you need.
View user's profile Send private message Send e-mail
mtulbert


From:
Plano, Texas 75023
Post  Posted 4 Nov 2018 12:52 pm    
Reply with quote

I will second what Richard said. Your guitar is experiencing all the symptoms of going from a plain 22 to a wound 22.

You have 2 choices: 1 replace with a plain string or 2 make some modifications to use the raise and the drop. If you decide to the 2nd way you should contact Chuck Beck who makes the Desert Rose guitars to make sure that a wound string will work.

Hope this helps.

Regards,
_________________
Mark T


Infinity D-10 Justice SD-10 Judge Revelation Octal Preamp, Fractal AXE III, Fender FRFR 12
View user's profile Send private message Send e-mail
Paddy Long


From:
Christchurch, New Zealand
Post  Posted 4 Nov 2018 7:17 pm    
Reply with quote

Change the 6th string to a 22 plain - end of problem !
_________________
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases.
View user's profile Send private message Send e-mail
Don Ricketson


From:
Llano, Texas
Post  Posted 5 Nov 2018 8:24 pm    
Reply with quote

Travis there is a stickey over in the pedal steel section by Jon Light on that very thing. It's very good info. Check it out before you do anything.
_________________
GFI D10-8/6 Black/Red
Zum Encore 4/5 Red
Justice ProLite 3/4 Black
2-Nashville 112

"Making The Stars Shine"
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron