| Author |
Topic: !! Urgent !! Toogle switch Emmons LL2 |
Mat Davallet
From:
France (Vendée)
|
Posted 15 Sep 2018 2:21 am |
|
Hi
My LL2 1992 Emmons toggle switch is definitely broken. Does anyone knows where to buy a new one ?
I've made a temporary repair but i can't disable tone control knob, anyone for explanation and/or schematic ?
Thanks for your help
Pics of my broken toggle switch:
 [/img]
_________________
Mullen G2 SD10/Schild SD10/Nash400/lemay mod/Emminence neo speaker/Brad Sarno "tonic preamp"/Strymon bluesky/Telonics volume/Tonealigner pickup/ http://www.pedalsteel.fr |
|
|
 |
Doug Palmer
From:
Greensboro, North Carolina, USA
|
Posted 15 Sep 2018 5:05 am Switch
|
|
Mat, I buy those at advance auto over here. You can probably find one at any auto parts store.
_________________
Emmons D-10, ST-10,LD-10 III, NV-112,Fender Deluxe Reverb. Authorized wholesale dealer musicorp.com! |
|
|
|
Mat Davallet
From:
France (Vendée)
|
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 15 Sep 2018 9:26 am
|
|
It's a DPDT, center on switch.
I'm sure there are electronics supply companies in France.
Also, it's a fairly standard switch common in regular guitars.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Mat Davallet
From:
France (Vendée)
|
Posted 15 Sep 2018 9:32 am
|
|
Thanks a lot Lane, DPDT is exactly the spec term i was looking for... helpful !
mat
_________________
Mullen G2 SD10/Schild SD10/Nash400/lemay mod/Emminence neo speaker/Brad Sarno "tonic preamp"/Strymon bluesky/Telonics volume/Tonealigner pickup/ http://www.pedalsteel.fr |
|
|
|
Mat Davallet
From:
France (Vendée)
|
Posted 15 Sep 2018 9:36 am
|
|
is it DPDT on/off/on switche ?
_________________
Mullen G2 SD10/Schild SD10/Nash400/lemay mod/Emminence neo speaker/Brad Sarno "tonic preamp"/Strymon bluesky/Telonics volume/Tonealigner pickup/ http://www.pedalsteel.fr |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 15 Sep 2018 10:32 am SPST On-Off Switch
|
|
Mat,
Unless you have something other than a standard tone circuit (two single coil pickups) all you need is a simple SPST on-off switch, with only two logs to solder the two wires to.
https://www.banzaimusic.com/Carling-SPST-2POS.html
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Mat Davallet
From:
France (Vendée)
|
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 15 Sep 2018 11:14 am Wiring Diagram
|
|
Mat,
Doug Palmer or Lane Grey could probably tell you the proper terminology for the switch you need.
Here are some typical Emmons circuits.
If your switch is original to the guitar, I would guess that you must have dual coil pickups and the sketch on the bottom would be the one to go by. The switch simply selects one coil or the other for each pickup (depending on which position the neck selector switch is in). The tone circuit can not be defeated (turned off) with this circuit. The pair of lugs in the middle are common and the toggle has two positions that control the two pairs of lugs on each end and thus switches between one pair or the other.
Someone please correct me if I'm wrong...
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
