| Author |
Topic: Carter |
Brian Henry
|
Posted 27 Aug 2018 4:49 am |
|
| Does anyone know which brand of pullers would work on a Carter pedal steel.. Many thanks Brian |
|
|
 |
Bill Ferguson
From:
Milton, FL USA
|
Posted 27 Aug 2018 4:55 am
|
|
I assume you are asking about bell cranks.
Al Brisco has all the Carter parts you would need.
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 27 Aug 2018 7:14 am
|
|
You should also be able to use any brand bellcrank that fits on a square shaft. I think the Carter has 3/8" square cross shafts, but I could be wrong. You just have to have different style pull rods.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Brian Henry
|
Posted 27 Aug 2018 7:30 am
|
|
| Thank you Richard. That’s what I needed to know! |
|
|
|
Bill Ferguson
From:
Milton, FL USA
|
Posted 27 Aug 2018 8:01 am
|
|
Sorry. I just assumed that you wanted to keep all the pull rods the same
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Ted Nesbitt
From:
Northern Ireland
|
Posted 29 Aug 2018 1:18 pm Carter Bell-Cranks
|
|
| Brian, If you need original Carter bell-cranks I have some. Let me know what you need. |
|
|
|
