Author |
Topic: what is the best humbucker for a 12/string bmi? |
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 24 Aug 2018 6:34 am
|
|
i need a humbucker or even a single coil with a lot of response. this is for an older 12/string bmi?....thanks jack....(anyone got anything for sale?) |
|
|
![](templates/respond/images/spacer.gif) |
George Kimery
From: Limestone, TN, USA
|
Posted 24 Aug 2018 7:02 am What is the best humbucker for a bmj 12 string
|
|
Let me throw out a couple other options FWIW:
If you like the pickup you have, but it is just not putting out a hot enough signal, you can run a Lil Izzy PLUS which will boost the output by 6db, which is quite a bump. plus, you will get a clearer sound.
If you are getting a hum from a single coil pickup, you can use an Electro Harmonix DeBugger to e!imitate the hum. As far as a new pickup, my advice is to have Jerry Wallace make you a sing!e coil. I am biased because I don't like humbuckers. I am speaking from experience on all three suggestions. Good luck with whatever direction you decide to go.
Last edited by George Kimery on 24 Aug 2018 7:09 am; edited 1 time in total |
|
|
![](templates/respond/images/spacer.gif) |
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 24 Aug 2018 7:09 am pickup?
|
|
george, thanks for the info. my pickup doe,s not have any hum. the main problem is that it is wound to about....14.5....i would like to find a used pickup if possible. i am using julian tharpes setup on a 12/string....jack |
|
|
![](templates/respond/images/spacer.gif) |
Lyle Dent
From: Little Rock ,Arkansas
|
Posted 25 Aug 2018 4:22 pm Pickup for BMI
|
|
Jack, either an alumitone or if you could find a Gene Turner Powerboost Pickup. I have a friend with an alumitone in his BMI SD-12 and a LW amp ,it has the bite of a PP Emmons. _________________ Rittenberry Prestige SD-12,Mullen G2 SD-12 ,Mullen PRP S-12 BMI S-12 V8 octal, BJS Bars, LiveSteelStrings,Steelers Choice Seat. |
|
|
![](templates/respond/images/spacer.gif) |
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 25 Aug 2018 4:48 pm pickup?
|
|
i have a 14/string powerboost gene turner, would like to have a 12/ string. would also like to try an alumitone, if anyone know where to find the alumintone pleaselet me know, i appreciate any help possible....thanks jack |
|
|
![](templates/respond/images/spacer.gif) |
Lyle Dent
From: Little Rock ,Arkansas
|
Posted 26 Aug 2018 9:11 am BMI Pickup
|
|
Jack, saw where Lace has a new Robert Randolph Alumitone. Should be a 12 string since that what he plays. _________________ Rittenberry Prestige SD-12,Mullen G2 SD-12 ,Mullen PRP S-12 BMI S-12 V8 octal, BJS Bars, LiveSteelStrings,Steelers Choice Seat. |
|
|
![](templates/respond/images/spacer.gif) |
Lyle Dent
From: Little Rock ,Arkansas
|
Posted 26 Aug 2018 9:11 am BMI Pickup
|
|
Jack, saw where Lace has a new Robert Randolph Alumitone. Should be a 12 string since that what he plays. _________________ Rittenberry Prestige SD-12,Mullen G2 SD-12 ,Mullen PRP S-12 BMI S-12 V8 octal, BJS Bars, LiveSteelStrings,Steelers Choice Seat. |
|
|
![](templates/respond/images/spacer.gif) |
Ricky Davis
From: Bertram, Texas USA
|
|
|
![](templates/respond/images/spacer.gif) |
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 26 Aug 2018 5:38 pm
|
|
i need a pickup that mounts like the one that is original? any suggestions?....thanks jack
![](https://bb.steelguitarforum.com/userpix1712/4839_064388704FF745CB82CD09B8230CB70D_1.jpg) |
|
|
![](templates/respond/images/spacer.gif) |
Jack Goodson
From: new brockton,alabama (deceased)
|
Posted 26 Aug 2018 5:40 pm ohms
|
|
this one is about 14.75 reading |
|
|
![](templates/respond/images/spacer.gif) |