| Author |
Topic: Short scale fingerboard for Fender " 23 inch scale" needed.? |
Rollie Storbakken
From:
Washington, USA
|
Posted 21 Jun 2018 11:47 am |
|
| Looking to move the nut on a long scale fender double 8 to a short s scale and need the correct size fingerboard. Rollie |
|
|
 |
Larry Phleger
From:
DuBois, PA
|
Posted 22 Jun 2018 5:45 am
|
|
Check out George Boards. They produce fretboards in a variety of scale lengths, and they have a design that is nearly identical to a Fender fretboard.
http://www.georgeboards.com/ |
|
|
|
Rollie Storbakken
From:
Washington, USA
|
Posted 22 Jun 2018 10:00 am Fretboard 23 inch scale
|
|
| Thank you for your responce. |
|
|
|
Rollie Storbakken
From:
Washington, USA
|
Posted 22 Jun 2018 10:03 am Fretboard 23 inch scale
|
|
| Thank you for your responce. |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 22 Jun 2018 5:44 pm
|
|
I'm curious. Why would you want a shorter scale? are you simply moving the nut on a long scale Fender and bolting on a short-scale 'board?
I'm trying to figure out why - with a shorter scale you'll sacrifice tone and sustain. What advantages do you foresee?
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 23 Jun 2018 6:43 am
|
|
| Jim Sliff wrote: |
I'm curious. Why would you want a shorter scale? are you simply moving the nut on a long scale Fender and bolting on a short-scale 'board?
I'm trying to figure out why - with a shorter scale you'll sacrifice tone and sustain. What advantages do you foresee? |
Perhaps a tuning that is higher in pitch??
_________________
Lee, from South Texas - Down On The Rio Grande
There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.
Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat |
|
|
|
Rollie Storbakken
From:
Washington, USA
|
Posted 25 Jun 2018 7:28 pm Short scale fingerboard for remodeling long scale Fender db
|
|
| Long scale Fender 8----The E9th breaks the high string when tuned to pitch. Going with D9th. Not going to shorten scale. |
|
|
|
Thom Gustafson
From:
Mount Vernon, Washington, USA
|
Posted 26 Jun 2018 7:10 am
|
|
| Hi Rollie! Is your string breaking where it attaches to the tuning machine? One thing you might want to try is making sure the string has enough windings around the tuning machine to keep the string from being cut by the edge of the attachment hole. |
|
|
|
