need reverb tank for nashville 400

Terry Pendlay · From: Effingham Illinois, USA

need reverb tank and WIRE HARNESS FROM TANK TO AMP 4 pin connection.. thanks

Terry Pendlay · From: Effingham Illinois, USA

Gary Webb · From: New York, USA

I have one.

Al Miller · From: Waxahachie Texas

Terry ,
You can pick up a brand new replacement tank at
Antique Electronic supply . com for around $20.00
+ some shipping .. just look up the part # stamped on your old one and cross it up with an Acutronics pan . I prefer the MOD pan myself its 20.00 as well
Boo
_________________
AL (BOO) Miller
Mullen D10
76 Emmons P/P
2022 65 Emmons Resound P/P D10

Paul Norman · From: Washington, North Carolina, USA

Peavey doesn't have and does not make the cord anymore. Unless someone has a new one it will have to be made up. It has a 4 pin molex on one end and 2 R.C.A. on the other ends.
I need one too.

Al Miller · From: Waxahachie Texas

Ken Fox has them ! Or can make them . He made me one a few years ago
_________________
AL (BOO) Miller
Mullen D10
76 Emmons P/P
2022 65 Emmons Resound P/P D10

Jerry Overstreet · From: Louisville Ky

https://bb.steelguitarforum.com/viewtopic.php?t=288823&highlight=peavey+reverb+cable

JIC you didn't see it fellas, Bill Moore posted some info on building the Molex ends with parts from Jameco.

The RCA plugs should be available many places. And of course, you want to use shielded cable.

J R Rose · From: Keota, Oklahoma, USA

I have a 17 inch MOD unit, 3 springs. You can have for the shipping cost. J.R.Rose
_________________
NOTHING..Sold it all. J.R. Rose

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: