| Author |
Topic: Ernie Ball Black Eagle |
Randy Sims
From:
Virginia, USA
|
Posted 19 May 2018 4:49 pm |
|
| Greetings & Blessings. Would anyone have, or have any knowledge of a Ernie Ball Black Eagle 3 floor & 1 knee that they could share some information concerning parts? I'd greatly appreciate it. Thank you kindly. |
|
|
 |
Ron Pruter
From:
Arizona, USA
|
Posted 19 May 2018 8:03 pm
|
|
A friend of mine had one of these about 25 yrs ago. I remember it being a nice, tight, no bull little pull and release guitar.
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
Randy Sims
From:
Virginia, USA
|
Posted 19 May 2018 8:15 pm Ernie Ball Black Eagle
|
|
| Thank you Ron. Blessings |
|
|
|
John McClung
From:
Olympia WA, USA
|
Posted 20 May 2018 12:38 pm
|
|
I witnessed Buddy Emmons playing one of these at the Ernie Ball NAMM show booth, sometime in the early 80s. Made it sound like a push-pull!
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Randy Sims
From:
Virginia, USA
|
Posted 21 May 2018 3:44 am Black Eagle
|
|
| Thank you John for sharing. Blessings |
|
|
|
David Langdon
From:
West Bridgford, Nottingham Notts, United Kingdom
|
Posted 22 May 2018 6:32 am
|
|
| I think these guitars used Bela keyless tuners on them. You could search the forum for info on these. They did need careful maintenance, but worked well. |
|
|
|
Randy Sims
From:
Virginia, USA
|
Posted 16 Aug 2018 2:48 pm Ernie Ball Black Eagle
|
|
UPDATE !!!
These are the parts that I am in need of. The parts are slightly worn at the point the white arrow points to, causing the strings to slip and not stay in tune. Primarily the curved (what I call) locking plate. If anyone could help with parts, information on anyone who could make the parts, or anything I can do to correct this situation, I would greatly appreciate any information, suggestions, and help. This seems to have been an issue with these parts, as others have had the same issues. I very much would like to correct this, and make it available for someone else to enjoy. Thanks and Blessings.
 |
|
|
|
