| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic National New Yorker ca. 1937?
Reply to topic
Author Topic:  National New Yorker ca. 1937?
J Dave Clark

 

From:
Florida, USA
Post  Posted 12 Apr 2018 9:12 am    
Reply with quote

Hello all! Steel Guitar newbie here. Someone traded me this beauty for an old computer I had lying around.

Digging around on this and other forums, best I can come up with is that it's around a 1937, due to the serial number (doesn't start with a letter), the parallelogram fretmarkers, three-position chicken-head selector, bridge pickup, and inlay headstock logo.

Am I too far off?










View user's profile Send private message Send e-mail
Bill Groner


From:
QUAKERTOWN, PA
Post  Posted 12 Apr 2018 9:45 am    
Reply with quote

Does he have anymore? I have an old computer... Very Happy
_________________
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 12 Apr 2018 9:46 am    
Reply with quote

I would make that trade in a New York(er) minute. That old cable looks like it's seen its better days. If that beauty was mine, I'd procure one of these Switchcraft 332As in another New York minute:

View user's profile Send private message Send e-mail
J Dave Clark

 

From:
Florida, USA
Post  Posted 12 Apr 2018 11:04 am    
Reply with quote

Jack Hanson wrote:
I would make that trade in a New York(er) minute. That old cable looks like it's seen its better days. If that beauty was mine, I'd procure one of these Switchcraft 332As in another New York minute:


Awesome, thanks! What kind of slide should I be using?
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 12 Apr 2018 11:13 am    
Reply with quote

J Dave Clark wrote:
What kind of slide should I be using?

You could pose that question to twenty different players and receive twenty different answers. Personally, for lap steel, I've been using the 3/4" x 3" stainless steel bullet bar marketed by Latch Lake (formerly known as "Broz-O-Phonic") for years. It's relatively inexpensive, is readily available, and it works fine for me.
View user's profile Send private message Send e-mail
J Dave Clark

 

From:
Florida, USA
Post  Posted 12 Apr 2018 11:22 am    
Reply with quote

Thanks again...I was on the fence about whether to sell her or sit down and learn the ropes (already play guitar and bass). I think I will keep her around for awhile and play.

Anyone know how close I am on the year?
View user's profile Send private message Send e-mail
Eric Dahlhoff


From:
Point Arena, California
Post  Posted 12 Apr 2018 11:32 am    
Reply with quote

Check this site...
http://www.oldfrets.com/
Very sweet National there. I too have a bunch of old computers to trade...
Wink
_________________
"To live outside the law you must be honest." (Bob Dylan)
View user's profile Send private message Send e-mail
Noah Miller


From:
Rocky Hill, CT
Post  Posted 12 Apr 2018 12:00 pm    
Reply with quote

This configuration, with the single pickup and parallelogram markers, was built 1940-1. It's possible that it came in at the tail end of 1939, but it's definitely later than 1937.
View user's profile Send private message Send e-mail
J Dave Clark

 

From:
Florida, USA
Post  Posted 12 Apr 2018 12:02 pm    
Reply with quote

Noah Miller wrote:
This configuration, with the single pickup and parallelogram markers, was built 1940-1. It's possible that it came in at the tail end of 1939, but it's definitely later than 1937.


I'll be damned, looks like you're right:

https://www.elderly.com/national-new-yorker-lap-steel-c-1940.htm

Thanks!!!
View user's profile Send private message Send e-mail
Jim Newberry


From:
Seattle, Upper Left America
Post  Posted 13 Apr 2018 5:53 pm    
Reply with quote

Mine's a transitional one... It has the staggered pole string-through pickup and engraved headstock logo, but the multi-color Roman-numeral fretboard. The guard over the pickup is painted black, but is brass(?), not wood.
_________________
"The Masher of Touch and Tone"

-1950 Fender Dual Pro 8
-1950's Fender Dual Pro 6
-Clinesmith D8
-Clinesmith 8-string Frypan
-Clinesmith Joaquin
-~1940 National New Yorker
-~1936 Rickenbacher B6
-Homebuilt Amps
View user's profile Send private message
Mick Hearn

 

From:
United Kingdom
Post  Posted 17 Apr 2018 1:53 pm    
Reply with quote

Judging by the pickup cover it appears similar to mine. The pickup cover is made from brass soldered to a box shape and painted. Mine covers a pickup which is string through design but the actual pickup is above the strings rather than under. Dated 1940 to 42.
_________________
MSA Classic 12 string Universal, Remington Steelmaster D8, National D8 Console x 2, George Boards Lap Steel, National New Yorker.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron