| Author |
Topic: Running direct - IEM |
Danny Naccarato
From:
Burleson, Texas
|
Posted 18 Feb 2018 10:12 am |
|
I know this has been beat to death but it's a new year. One of the bands I work with is in-ears. I've used the Quilter ProBlock 200, but the output via XLR is weak. Using the line out (effects send) renders a hotter signal but still sounds like an AM radio, even when mic'ing a speaker. My ears are triple UE-7's.
I know the x-32 Rack needs tweaking for sure but I'm curious what some folks are using to send a really good signal to begin with??
Thanks in advance. |
|
|
 |
mtulbert
From:
Plano, Texas 75023
|
Posted 18 Feb 2018 11:44 am
|
|
Check your email
_________________
Mark T
Revelation Octal Preamp, Fractal AZE III, Fender FRFR 12 |
|
|
|
Dick Wood
From:
Springtown Texas, USA
|
Posted 18 Feb 2018 3:17 pm
|
|
Hey Danny, I've been using a Behringer PM-1 for years and it works great. Just EQ your Aux mix at the board and you're in business.
_________________
Cops aren't paid much so I steel at night. |
|
|
|
Dyke Corson
From:
Fairmount, IL USA
|
Posted 18 Feb 2018 6:57 pm
|
|
| OK I've struggled with this for years. My latest solution is to use a small headphone amp (I'm using a Rolls) and I run my pre/amp (line6, V8, etc.) directly to a channel on the Rolls. I bring the send from the console (X32, Yamaha TF5, etc) into a different channel of the Rolls also. This way my Westones plug into the Rolls, I have a level for my steel (and 6 string guitar) preamps, and bring the console mix in on it's own channel. I'm doing my own mix on my iPad for the console, so I pull my guitar and steel OUT of MY house monitor mix, leaving the raw signal from my preamps from the Rolls. By doing this I no longer get the processed "compressed" (am radio) sound from the console mix, I'm getting the raw outputs of the pre-amp, and bring in the rest of the band on their own channel. I'm sure there's an easier way, but this way I get my sound every night and don't have to depend on what the sound company is sending me. |
|
|
|
Danny Naccarato
From:
Burleson, Texas
|
Posted 19 Feb 2018 6:55 am
|
|
| Problem with the Rolls is noise. Ground lift helps but does not eliminate the noise. Brand new unit. My other does the same thing.... |
|
|
|
Dyke Corson
From:
Fairmount, IL USA
|
|
|
|
Godfrey Arthur
From:
3rd Rock
|
Posted 4 Mar 2018 3:48 pm
|
|
Impedance matching and gain staging is key to getting these sends to work. You may need a DI box out of your amp to go to the PA mixer to get to your IEM's at proper bandwidth.
_________________
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7 |
|
|
|
Dan Klotz
From:
Houston, Texas
|
Posted 13 Mar 2018 1:05 am
|
|
I run direct out of my Steelaire.
_________________
2- Rittenberry D10's
Quilter Steelaire. Nashville 400. Session 500 |
|
|
|
