| Author |
Topic: Rack adapter for Sarno V-8 |
Marty Nemanick
From:
Madera, California, USA
|
Posted 26 Jan 2018 12:29 pm |
|
Do any of you know if there is an adapter available for this preamp, or suggestions on how to make one?
Thank you,
Marty |
|
|
 |
Jim Cooley
From:
The 'Ville, Texas, USA
|
|
|
|
Ben Waligoske
From:
Denver, CO
|
Posted 26 Jan 2018 8:30 pm
|
|
Indeed. And if for some reason Brad can't set you up, pretty much any standard rack shelf for music gear should hypothetically work... if you need to fasten it to the shelf in a non-heavy duty fashion, maybe try a couple strips of velcro...
Here's a pretty standard rack shelf, FWIW: https://www.sweetwater.com/store/detail/RkShelfU1
If you need the V8 to fasten into the rack itself for transportation in a heavy duty way, Brad probably would have answers for the best solution...it looks like the faceplate of the V8 may need to be screwed in place in that case... but I'm not totally sure. Brad would know best, but hope that helps! |
|
|
|
Bob Hoffnar
From:
Austin, Tx
|
Posted 26 Jan 2018 9:41 pm
|
|
I keep my V8 on a rack in my studio setup. I use a standard universal rack like the one in the link. Works fine. The V8 screws in solid from underneath.
_________________
Bob |
|
|
|
Marty Nemanick
From:
Madera, California, USA
|
Posted 27 Jan 2018 10:06 am
|
|
| Thank you for the shelf suggestion, I think that will work just fine........Marty |
|
|
|
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 27 Jan 2018 6:02 pm
|
|
| And there's room left over for other stuff. Like a Black Box. |
|
|
|
