| Author |
Topic: Bell Cranks |
Billy McCombs
From:
Bakersfield California, USA
|
Posted 11 Jan 2018 7:49 pm |
|
Will Bell cranks from a MSA work for a Derby?
_________________
78 Emmons PP,Great tone.82 Emmons SKH #56 |
|
|
 |
Dick Sexton
From:
Greenville, Ohio
|
Posted 12 Jan 2018 6:17 am Derby Cross Shafts
|
|
Billy, my Derby Cross Shafts are 5/16". If the MSA bell cranks will fit that size cross shaft, they should work.
I have seen Derbys outfitted with Emmons bell cranks to get more adjustability. I think many steels use this size cross shaft. Emmons, GFI, Fessy, Magnum come to mind. |
|
|
|
Al Evans
From:
Austin, Texas, USA
|
Posted 12 Jan 2018 8:59 am
|
|
For what it's worth, the cross shafts on my (1976) MSA are 3/8".
_________________
2018 MSA Legend, 2018 ZumSteel Encore, 2015 Mullen G2, G&L S-500, G&L ASAT, G&L LB-100, Godin A4 Fretless, Kinscherff High Noon |
|
|
|
Charley Bond
From:
Inola, OK, USA
|
Posted 12 Jan 2018 10:14 am Bell Cranks
|
|
The Bell Cranks on a Sierra use a 5/16 hole. I think the Olympics use a 0.125 Dia Pull Rod. I have some with holes & even a few with slots.
_________________
Steel Guitar players are members of a Special Family |
|
|
|
