Author |
Topic: noisy wet reverb |
Karen Sarkisian
From: Boston, MA, USA
|
Posted 16 Nov 2017 9:06 am
|
|
Wet Reverb causing some noise when I use it, regardless of whether its on or off, when its in the chain there is additional noise. Not getting the same noise with my Strymon El Cap pedal. both are on isolated power supply power.
anyone else with this issue ? its a great sounding reverb but I don't like the noise. Doesnt matter if its before or after the preamp, same noise issue. _________________ Emmons, Franklin, Mullen |
|
|
|
George Macdonald
From: Vancouver Island BC Canada
|
Posted 16 Nov 2017 9:31 am Wet reverb
|
|
I have two Wet reverbs, one for my lap steel, [on a stand,] and one for my pedal steel. I haven't experienced the problem you described, but maybe try a different power adapter if you haven't already. If that doesn't work you might consider sending it to Neunaber in Calif. I'm sure they could solve the problem. |
|
|
|
Karen Sarkisian
From: Boston, MA, USA
|
Posted 16 Nov 2017 9:48 am
|
|
for sure I will contact them. it sounds great, just frustrated with the noise issue (being super picky)... _________________ Emmons, Franklin, Mullen |
|
|
|
Mitchell Smithey
From: Dallas, USA
|
Posted 18 Nov 2017 2:36 pm
|
|
Mine has developed a hum . Is that what you are getting? |
|
|
|
Karen Sarkisian
From: Boston, MA, USA
|
Posted 18 Nov 2017 10:23 pm
|
|
Mitchell Smithey wrote: |
Mine has developed a hum . Is that what you are getting? |
yes _________________ Emmons, Franklin, Mullen |
|
|
|
Tom Wolverton
From: Carpinteria, CA
|
Posted 20 Nov 2017 7:07 am
|
|
I had a reverb pedal get noisy the other day. It turned out that I had the input and outputs reversed. Once I fixed that, it was fine. The weird thing is that it sort of worked like that. _________________ To write with a broken pencil is pointless. |
|
|
|
Terry Lovett
From: Texas, USA
|
Posted 7 Jan 2018 8:17 am
|
|
Karen,
I'm curious if you resolved the hum issue with your pedal unit. Does your reverb device have a place to insert and use a battery? _________________ "Things can work,but not as well as they might if your thinking had been better" - J. Williams, MIT |
|
|
|