| Author |
Topic: Fessenden C6 LKL lever placement? |
Dave Stroud
From:
Texas
|
Posted 4 Jan 2018 6:43 pm |
|
| I can't find a good picture online of the usual placement for this lever. It's difficult to see where it should go when my C6 neck isn't rodded yet, but I'd like to go ahead and get the parts for it. Does anyone have a good picture or idea of where it goes? On my guitar, it looks like the cross shaft for that lever would be placed between the P7 and P8 cross shafts. Thanks for any help! |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 4 Jan 2018 7:43 pm
|
|
Much of that is down to personal preference, but if you look at my avatar, the shot is perfectly aimed for getting that view..
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Jerry Erickson
From:
Atlanta,IL 61723
|
Posted 5 Jan 2018 10:53 am
|
|
| Dave, which way is your lever moving? I have an older Fessy with a C6 knee lever that is moving to the right. If yours is moving the same way, I'll send a couple of pics if you like. |
|
|
|
Dan Beller-McKenna
From:
Durham, New Hampshire, USA
|
Posted 5 Jan 2018 11:42 am
|
|
I added C6 LKL to my Fessy last spring. I put it in the 8th hole, placing the axle under the pedal 4 pull plate (for lack of a better term), right next to E9 LKR
But(!) this left C6 LKR much too far away. Just this week I swapped its location with E9 LKV. Much better. In fact, the guitar feels and sounds so good, I'm gigging it tomorrow night! Eventually, I will want to extend the vertical, but it works fine for me for now. |
|
|
|
