| Author |
Topic: Loose Nylon Tuner |
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 29 Nov 2017 9:27 pm |
|
On my BMI one of the nylon tuners is much easier to turn than the others. I've tried swapping out tuners from other strings and that doesn't help. Whatever nylon tuner I put on that rod, it's a lot looser than the others. I removed the rod and cleaned the threads real well, thinking maybe some lubricant got on them. That didn't help.
Any ideas? Is there something I could put on the threads of that one rod to help keep the nylon tuner a little more snug?
_________________
Lee, from South Texas - Down On The Rio Grande
There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.
Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 30 Nov 2017 2:06 am
|
|
The first thing I'd try would be a nylon nut with a smaller bore.
Might you have one rod smaller than the others?
You COULD wrap the rod with Teflon tape (plumbing), but I think a nut meant for a smaller rod (smaller hole in the same size nylon) would be a better idea.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 30 Nov 2017 11:07 am
|
|
Well, I removed the rod and cleaned it again. This time I poured some regular old rubbing alcohol on the threads. I also poured some down into the nylon tuner. I wiped everything clean and dry and now the tuner is back to normal.
I guess there was a dab of lubricant on the threads that wouldn't simply wipe off. The rubbing alcohol seemed to do the trick.
 |
|
|
|
Len Amaral
From:
Rehoboth,MA 02769
|
Posted 30 Nov 2017 12:09 pm
|
|
| I thought nylon tuners are not threaded? A new nylon should be somewhat tight and create it's own threaded path. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 30 Nov 2017 2:18 pm
|
|
| Len Amaral wrote: |
| I thought nylon tuners are not threaded? A new nylon should be somewhat tight and create it's own threaded path. |
He's using the one that was already on the guitar, not a new one.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Len Amaral
From:
Rehoboth,MA 02769
|
Posted 30 Nov 2017 2:52 pm
|
|
| Richard, I have read the post a bit closer. 👠|
|
|
|
Jim Bob Sedgwick
From:
Clinton, Missouri USA
|
Posted 1 Dec 2017 12:24 pm
|
|
| I have posted this before (about 10 years ago). If you remove the tuner and put one wrap of plumbers teflon tape on the threads of the changer rod, reinstall the tuner and it will tighten right up, Only use one wrap, if you use more, you will not be able to thread the nylon tuner back on. I never had to redo any of these fixes, they last a long time. |
|
|
|
John Billings
From:
Ohio, USA
|
Posted 1 Dec 2017 3:17 pm
|
|
Violin rosin sometimes works in cases like this,
_________________
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps |
|
|
|
Kevin Fix
From:
Michigan, USA
|
Posted 1 Dec 2017 7:19 pm Tuning Nuts
|
|
| Get new ones. They are not threaded. When you put them on the rod it will cut new threads into the new nylon nut. It will be tight. |
|
|
|
