| Author |
Topic: JCH Bellcranks |
Al Michalczak
From:
San Antonio, Texas, USA
|
Posted 27 Oct 2017 9:44 pm |
|
| I need two bell cranks for a JCH. Anybody got any to spare? |
|
|
 |
John McClung
From:
Olympia WA, USA
|
Posted 27 Oct 2017 10:36 pm
|
|
Lynn Stafford has a JCH D-10 for sale, he might have some spare parts.
http://www.steelguitarwest.com/guitars-currently-for-sale/
(scroll down a bit to see the JCH)
The crossrods on a JCH are probably standard 3/8" square, so the crossrods of most brands should fit.
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net |
|
|
|
Tim Mathews
From:
Missouri, USA
|
Posted 28 Oct 2017 4:11 am
|
|
| I heard JCH was a reverse engineered zum. Maybe they would fit |
|
|
|
Danny Letz
From:
Old Glory,Texas, USA 79540
|
Posted 28 Oct 2017 5:16 pm
|
|
| Best I remember the swivels that attach the pull rods to the bellcrank are very similar to GFI. I think I used a few of the GFI swivels on the one I had. Maybe GFI bellcranks would work in a pinch. |
|
|
|
Tony Rankin
From:
Land O’ Lakes, FL
|
Posted 2 Nov 2017 10:58 am
|
|
I put LeGrande bellcranks on mine.
_________________
Tony Rankin |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 14 Jun 2024 2:41 am
|
|
I'm resurrecting this old thread as I have just acquired a '91 8+9 JCH.
After having moved things around in the last few days, I found one Emmons 14-hole BC and maybe two early LeGrande 4-hole cranks.
I like the JCH ones best: those old Emmons BCs have that awkward horseshoe-shaped spring clip - I can't deal with those.
I'm interested to read that GFI parts might work. I have almost everything I need, but I prefer raising both Cs and raising-and-lowering both As. I'm three rids/BCs short.
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Barry Coker
From:
Bagley Alabama, USA
|
Posted 15 Jun 2024 2:49 am
|
|
Hi Roger I know the JCH cranks are steel like the Emmons and GFI but if you don't have any luck with those I make some out of Aluminum that would work.
Good luck
Barry
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 15 Jun 2024 3:25 am
|
|
They look nice, Barry! Do you also include the collar through which the rod goes?
_________________
Roger Rettig - Emmons D10s, Quilter TT-12, B-bender Teles and old Martins.
---------------------------------- |
|
|
|
Barry Coker
From:
Bagley Alabama, USA
|
Posted 15 Jun 2024 3:51 am
|
|
Yes the crank had a brass collar to accecpt a 1/8" pull Rod or whichever size pull rod you want.
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
