| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic repair links?
Goto page 1, 2  Next
Reply to topic
Author Topic:  repair links?
Jerry Dragon


From:
Gate City Va.
Post  Posted 21 Oct 2017 5:31 am    
Reply with quote

I have checked the links here at the site and they are all for manufacturers. Does anyone know where I can find a link for people who do repairs and restorations?
View user's profile Send private message Send e-mail
Ken Campbell

 

From:
Ferndale, Montana
Post  Posted 21 Oct 2017 5:56 am    
Reply with quote

Jim Palenscar,
http://www.steelguitars.me/

Top shelf.
View user's profile Send private message Send e-mail
Jerry Dragon


From:
Gate City Va.
Post  Posted 21 Oct 2017 6:02 am    
Reply with quote

thank you, am looking for something closer to 12516, upstate N.Y. I don't know if I can even get this beast out of the house to ship it. With the weight it is, it will probably be more economical to drive it somewhere than to ship it?
View user's profile Send private message Send e-mail
Mike Scaggs


From:
Nashville, TN
Post  Posted 21 Oct 2017 6:39 am    
Reply with quote

What kind of guitar do you have that needs repair? What exactly are you looking to do?

Cheers,
_________________
I can explain it to you but I can't understand it for you

Zum double Hybrid 8x9, 64 Twin (JBLs), p2pAmps Bad-Dawg, p2pAmps Tremendous Reverb, Visit my website www.p2pamps.com
View user's profile Send private message Send e-mail Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 21 Oct 2017 7:34 am    
Reply with quote

This brings up a good point. There should probably be a link to repair shops/individuals. It could include amp repairs and customizations. There are always people making posts looking for repair guys.

Of course that would require someone to look in the links section. Most don't. Many of the questions posted could have been answered by looking in the links section.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Jerry Dragon


From:
Gate City Va.
Post  Posted 21 Oct 2017 8:26 am    
Reply with quote

Mike Scaggs wrote:
What kind of guitar do you have that needs repair? What exactly are you looking to do?

Cheers,


I am new at this and just purchased a ZB Custom D10. I have played a wee bit in the past so am not totally ignorant of the instrument. Once I get it up and going it should be gone over by someone who really knows what they are doing. Except for being in tune I wouldn't really know if the instrument is performing up to its potential.
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 21 Oct 2017 8:44 am    
Reply with quote

Kevin Hatton (a forum member) in Buffalo is your man. He restores ZB's and has even built some. A friend from York, Pa has a ZB SD-10 that Kevin built and Kevin went over his D-10 ZB.

http://www.hattoncases.net/
View user's profile Send private message Send e-mail
Jerry Dragon


From:
Gate City Va.
Post  Posted 21 Oct 2017 9:01 am    
Reply with quote

thank you Jack. As a machinist and a mechanic and a musician I will get it as far as I can and then go from there. I am getting some feedback from folks around my way also. First I have to learn and study the mechanics of the instrument before I go tinkering with anything. I have been laying under it seeing how the mechanisms work. There is more play than should be in the knee levers so I will have to address that. I have to get it in tune first. That should be an adventure. I am not sure which allen bolts adjust which pedal, lever, etc so I have to get under there and see what is what just to tune it.
View user's profile Send private message Send e-mail
John De Maille


From:
On a Mountain in Upstate Halcottsville, N.Y.
Post  Posted 21 Oct 2017 3:58 pm    
Reply with quote

You could contact John Widgren from Wilton, Connecticut. He's very good at repairs and refurbishing. He is a member of the SGF.
Also, Tommy Cass from ( I think? ) Baldwinsville, Mass. he's another expert at repairing and refurbishing steel guitars. He does excellent work. Also a SGF member.
View user's profile Send private message Send e-mail
Jerry Dragon


From:
Gate City Va.
Post  Posted 22 Oct 2017 6:41 am    
Reply with quote

I made bell cranks for someone on the site here about 12 years ago? They sent me one and I copied it and made 20 on CNC lathes and mills out of 304 stainless steel. I think it might have been John from Ct. I don't remember, it was someone in the area. I only charged for the shipping and the shipping was close and wasn't much. I made them in my spare time at work and on company equipment with company stock. I think I may still have the mastercam drawings and programs on one of my computers. If I still have the drawings I should be able to generate the programs still. Don't know what guitar they were for.
View user's profile Send private message Send e-mail
john widgren


From:
Wilton CT
Post  Posted 22 Oct 2017 7:12 am     Parts
Reply with quote

Hi Jerry, I remember we talked once years ago about you maybe making some lap steel parts for me but it never panned out. The parts (bellcranks) you mentioned making were not done for me. If I do need something made it's good to know about you and your skills and equipment. Great!

BTW I always pay or barter for work done for me, so surely you are thinking of someone else for whom you made parts for shipping costs.

I do not have any experience working with ZBs. The best guy I can think of for ZB work would be Billy Knowles..Do a forum check for the ZB resto he did for Tommy White..its incredible, and Billy is tops in my book.

I think Kevin Hatton also has lots of good ZB expertise, you should give him a shout..one of the good guys.
_________________
Steel Guitar Services:
Live performance and recording. Instruments, repairs and lessons. Fresh bait/discount sushi.
(203) 858-8498
widcj@hotmail.com
View user's profile Send private message Send e-mail
Jerry Dragon


From:
Gate City Va.
Post  Posted 22 Oct 2017 8:19 am    
Reply with quote

who ever I made them for offered me compensation but I wouldn't take it. I really didn't spend anything on doing it but spare time at work. I would be running a different machine or programming and while I was doing that I would program and run the parts. Made the day go faster and gave me something satisfying to do. I never did follow up to find out if they worked or not, don't see why they wouldn't, I copied them pretty well. Then I eventually lost the email address and forgot the name. Getting old.
View user's profile Send private message Send e-mail
Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 22 Oct 2017 11:56 am    
Reply with quote

Kevin Hatton,At Retro custom steel guitars,Z.B's are his Thang!!
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
View user's profile Send private message Send e-mail
Storm Rosson

 

From:
Silver City, NM. USA
Post  Posted 22 Oct 2017 4:43 pm    
Reply with quote

What Stu said, Kevin is a master of ZB's ,one that he redid I remember he converted it to cross rods and bell cranks ,got rid of the 100 lbs or so of scrap iron from the old bar setup. It looked awesome.
View user's profile Send private message Send e-mail
Jerry Dragon


From:
Gate City Va.
Post  Posted 22 Oct 2017 4:54 pm    
Reply with quote

I just shot my wad on this and if I decide to go that route I will have to wait awhile. I don't know what the cost would be to refurbish this, I could see it being more than I paid for the guitar, or if it is worth it. I could probably take it apart clean it all up and replace the parts myself but for now I would just like to get it going so I can have something to play for awhile. If I can't do that something will have to be done. I don't know enough about it yet to know what to do to get it in tune or if something is wrong, but I am working on that. From pics I have seen it is all there.
View user's profile Send private message Send e-mail
ajm

 

From:
Los Angeles
Post  Posted 23 Oct 2017 8:37 am    
Reply with quote

Richard Sinkler wrote: "Of course that would require someone to look in the links section. Most don't. Many of the questions posted could have been answered by looking in the links section."

Yeah, or Googling it as well.
View user's profile Send private message
Michael Maddex


From:
Northern New Mexico, USA
Post  Posted 23 Oct 2017 11:22 am    
Reply with quote

There is a 'Steel-Related Services' link in the link section with at least two Repair Service Links there. If someone were to put together a short list of links to favorite repair people, I'm pretty sure b0b would be glad to check them out and add them to the list or maybe start a new section just for that. However, I can not speak for b0b, so it sure would be nice if he would chime in here.

That's only dos centavos worth-! Cool !
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke
View user's profile Send private message Send e-mail Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 23 Oct 2017 5:28 pm    
Reply with quote

Michael Maddex wrote:
There is a 'Steel-Related Services' link in the link section with at least two Repair Service Links there. If someone were to put together a short list of links to favorite repair people, I'm pretty sure b0b would be glad to check them out and add them to the list or maybe start a new section just for that. However, I can not speak for b0b, so it sure would be nice if he would chime in here.

That's only dos centavos worth-! Cool !


Good idea. But I would probably change the name. 'Steel Related Services' just doesn't reach out and grab me. I wouldn't have thought to look there.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Jerry Dragon


From:
Gate City Va.
Post  Posted 23 Oct 2017 6:42 pm    
Reply with quote

I went back to the links page and did not find that link until I typed Steel-Related Services into the search function. Then after I did that I realized there was a pull down menu with more links on it.
View user's profile Send private message Send e-mail
b0b


From:
Cloverdale, CA, USA
Post  Posted 23 Oct 2017 8:42 pm    
Reply with quote

Michael Maddex wrote:
There is a 'Steel-Related Services' link in the link section with at least two Repair Service Links there. If someone were to put together a short list of links to favorite repair people, I'm pretty sure b0b would be glad to check them out and add them to the list or maybe start a new section just for that. However, I can not speak for b0b, so it sure would be nice if he would chime in here.

That's only dos centavos worth-! Cool !

Not a bad idea. I'd be happy to do that. By the way, the "Links" resource isn't actually a part of the forum - it's on my personal web site (on a different server).
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website
Michael Yahl


From:
Troy, Texas!
Post  Posted 24 Oct 2017 5:30 am    
Reply with quote

b0b, I like that idea also. I get frequent inquiries as to who does repairs. I usually try and find someone in their immediate area but I do not have any comprehensive list.

If the guitar techs could be listed by region, I believe that would be helpful as many have asked if there was someone close enough to drive and drop off their guitar as they didn't want to ship it.

Consider our demographic customer/member base.

Michael
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp

PSG PARTS
http://www.psgparts.com/
View user's profile Send private message Send e-mail Visit poster's website
b0b


From:
Cloverdale, CA, USA
Post  Posted 24 Oct 2017 7:26 am    
Reply with quote

The Wordpress plugin I use isn't that versatile, Michael, but I can put each repairman's location in the description field. Smile
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 24 Oct 2017 7:34 am    
Reply with quote

Jerry,
I don't want to throw cold water on your project, but there aren't too many pedal steel mechanics who want to work on ZB's. They're a different animal than most pedal steels.
The last one I worked on, I converting it to a regular cross shafts setup. I got rid of all the John Deere hardware under the hood.
It would up looking like this:

View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 24 Oct 2017 7:47 am    
Reply with quote

Another problem I see, is the buttons on top of the page kind of get lost in the coloring of the page. They don't stand out. The blue text box under them with the white text really stands out. Maybe different color buttons, or maybe better, just make the text in the button a blue background and white text.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Michael Yahl


From:
Troy, Texas!
Post  Posted 24 Oct 2017 7:53 am    
Reply with quote

Totally understand Bob. I believe that whatever you come up with will be an asset.

My customers ask me all the time if I work on guitars and I have to tell them that I don't. The next question is always "Who does?"

Not all of my customer base is familiar with the forum but I do my best to direct them here and sign up.

I firmly believe that this (the Forum) is THE BEST resource out there!
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp

PSG PARTS
http://www.psgparts.com/
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron