| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Quilter Steelair Combo
Reply to topic
Author Topic:  Quilter Steelair Combo
Steven Finley


From:
California, USA
Post  Posted 10 Aug 2017 7:33 am    
Reply with quote

Just did another private ranch with Tom Bovine an outside gig with about five hundred quests in attendance,the quilter amp preformed like a gem,same great sound outside as in,Pat Quilter builds a great product check one out for yourself.
View user's profile Send private message Send e-mail
Quentin Hickey

 

From:
Nova Scotia, Canada
Post  Posted 20 Aug 2017 2:42 pm    
Reply with quote

Yes Quilter has something special that sets them apart for sure. I do love Peavey products, and Quilter sounds nothing like a Peavey but I have to say I equally love the Quilter.
View user's profile Send private message Send e-mail
Marco Schouten


From:
Amsterdam, The Netherlands
Post  Posted 21 Aug 2017 1:32 am    
Reply with quote

I believe that when they designed the Steelaire, their reference was the Fender Twin Reverb. I think that Quilter did a good job. Some time ago I out my Steelaire next to my friends Twin Reverb, and it was so easy to dial in an almost same tone. Different than a Peavey and different than my Evans, but if you are a Fender guy, it might be interesting for you.
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo
View user's profile Send private message Send e-mail
John Russell

 

From:
Austin, Texas
Post  Posted 23 Aug 2017 11:39 am     Steelaire Settings
Reply with quote

Can you give me the settings for your Steelaire? I have one and didn't get any thing like a Twin Reverb sound--went back to my Cube 80. I'd give it another shot if I could find the tone you're getting.
View user's profile Send private message Send e-mail
Marco Schouten


From:
Amsterdam, The Netherlands
Post  Posted 24 Aug 2017 3:38 am     Re: Steelaire Settings
Reply with quote

John Russell wrote:
Can you give me the settings for your Steelaire? I have one and didn't get any thing like a Twin Reverb sound--went back to my Cube 80. I'd give it another shot if I could find the tone you're getting.


I believe that the settings that got close were: Bass 6, Lo-Mid 3, Hi-Mid 4.5, Treb 6, Reverb 3, Dwell 4, Tone 6.
I didn't write down the values of the Twin Reverb, so it might not be close to how you dialed in your Twin.
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo
View user's profile Send private message Send e-mail
Morton Kellas

 

From:
Chazy, NY, USA 1
Post  Posted 24 Aug 2017 6:10 am    
Reply with quote

Play with your limiter control, Master volume and pre gains and you can get close to that sound.
View user's profile Send private message Send e-mail
Dick Wood


From:
Springtown Texas, USA
Post  Posted 27 Aug 2017 7:38 am    
Reply with quote

I think the Quilter sounds closer to Fender than a Peavey in my opinion.

The attached video is me and the ole Quilter struggling to play with a thrown together band last Friday night.

The amps weren't mic'd and the Ipad was about 8 feet away from my amp and these guys played loud as Hell.

https://www.facebook.com/dicky.wood/videos/1517135305009794/
_________________
Cops aren't paid much so I steel at night.
View user's profile Send private message Send e-mail Visit poster's website
Steven Paris

 

From:
Los Angeles
Post  Posted 27 Aug 2017 7:37 pm    
Reply with quote

Dick Wood wrote:
The attached video is me and the ole Quilter struggling to play with a thrown together band last Friday night.
https://www.facebook.com/dicky.wood/videos/1517135305009794/

"Sorry, this content isn't available right now
The link you followed may have expired, or the page may only be visible to an audience you're not in."


_________________
Emmons & Peavey
View user's profile Send private message Send e-mail
Dick Wood


From:
Springtown Texas, USA
Post  Posted 28 Aug 2017 5:12 am    
Reply with quote

Hmmm I just clicked on it here at work and it opened right up.
_________________
Cops aren't paid much so I steel at night.
View user's profile Send private message Send e-mail Visit poster's website
Dick Wood


From:
Springtown Texas, USA
Post  Posted 28 Aug 2017 5:29 am    
Reply with quote

Another thought is that you may have to be signed on to Facebook in order to open it.
_________________
Cops aren't paid much so I steel at night.
View user's profile Send private message Send e-mail Visit poster's website
Dave Meis


From:
Olympic Peninsula, Washington, USA
Post  Posted 28 Aug 2017 7:54 am    
Reply with quote

Dicky...I couldn't get it, either. The most recent video listed on your Facebook page was June 24. I'd like to hear it if you could direct me to it some other way? Thanks!
View user's profile Send private message Send e-mail
Dick Wood


From:
Springtown Texas, USA
Post  Posted 28 Aug 2017 10:26 am    
Reply with quote

I can't explain it. I don't know of another way to link it.

When I click on the link from either my Iphone or Office computer it plays ok.

Only other way would be to go to my FB timeline and view it there as it is open for anyone to watch.

EDIT: I re-entered the link to see it would work for y'all.

https://www.facebook.com/dicky.wood/videos/1517135305009794/
_________________
Cops aren't paid much so I steel at night.
View user's profile Send private message Send e-mail Visit poster's website
Dick Wood


From:
Springtown Texas, USA
Post  Posted 28 Aug 2017 12:19 pm    
Reply with quote

My page was set to friends so y'all try this link after resetting my page to public.

https://www.facebook.com/dicky.wood/videos/1517135305009794/
_________________
Cops aren't paid much so I steel at night.
View user's profile Send private message Send e-mail Visit poster's website
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 28 Aug 2017 2:40 pm    
Reply with quote

"Join Facebook or Log In To Continue"

That's all I get.
View user's profile Send private message Send e-mail
Dave Meis


From:
Olympic Peninsula, Washington, USA
Post  Posted 28 Aug 2017 4:16 pm    
Reply with quote

this is what I get, and I am logged in:

"Sorry, this content isn't available right now
The link you followed may have expired, or the page may only be visible to an audience you're not in."

Dang Dicky..you try to do something nice..and no good deed goes unpunished!
thanks for trying! Smile
View user's profile Send private message Send e-mail
Richard Lotspeich

 

From:
North Georgia
Post  Posted 28 Aug 2017 5:06 pm     link
Reply with quote

Dick Wood wrote:
My page was set to friends so y'all try this link after resetting my page to public.

https://www.facebook.com/dicky.wood/videos/1517135305009794/
I get "Sorry, this content isn't available right now" the other link was the same.
_________________
Dick Lotspeich
View user's profile Send private message Send e-mail
Dick Wood


From:
Springtown Texas, USA
Post  Posted 28 Aug 2017 5:21 pm    
Reply with quote

I thought some of you might like to hear the Quilter unmic'd and really cranked up. I give up, the computer has won.
_________________
Cops aren't paid much so I steel at night.
View user's profile Send private message Send e-mail Visit poster's website
Jon Jaffe


From:
Austin, Texas
Post  Posted 29 Aug 2017 5:41 am    
Reply with quote

It can only be viewed by "Friends". I used my Quilter three times the past weekend. Master was on 6, Ch 1 @7 and Ch 2 @4. No Volume issues.

BTW Dick the first song (MS) usually requires a $100 tip for the band! Very Happy
View user's profile Send private message Send e-mail
Bill Terry


From:
Bastrop, TX
Post  Posted 29 Aug 2017 6:50 am    
Reply with quote

Jon, did you buy yours locally? I see that South Austin Music is a dealer, wondered if you got it there or if they have any on the floor?

I'm interested in the amp, but reluctant to pull the trigger completely in the dark.
View user's profile Send private message Send e-mail
Jon Jaffe


From:
Austin, Texas
Post  Posted 29 Aug 2017 6:53 am    
Reply with quote

Bought from Forum member.
View user's profile Send private message Send e-mail
Bill Terry


From:
Bastrop, TX
Post  Posted 29 Aug 2017 6:54 am    
Reply with quote

Ah, thanks!
View user's profile Send private message Send e-mail
Dick Wood


From:
Springtown Texas, USA
Post  Posted 29 Aug 2017 9:07 am    
Reply with quote

Jon, I got $15 more than I was originally told so that was my tip I guess.
_________________
Cops aren't paid much so I steel at night.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron