| Author |
Topic: Nashville 1000 cabinet or? |
Ken Fox
From:
Nashville GA USA
|
Posted 15 Aug 2017 3:37 pm |
|
Working on a chassis now. Hope I can fix it. If so I have a really bad cab with no grill, damaged lower panel and no speaker. It is really beat. Not much to work with.
I need a complete cab, a reverb cable. Got the reverb tank and bag
Worst case I can repair and then cover the old cab with new Tolex. I would still need a grill. |
|
|
 |
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 15 Aug 2017 7:34 pm
|
|
edit.
_________________
http://www.littleoprey.org/
Last edited by Jerry Roller on 18 Aug 2017 10:53 am; edited 3 times in total |
|
|
|
Nicholas Ackron
From:
Daytona Beach
|
Posted 15 Aug 2017 7:40 pm
|
|
| I have a Bandit 112 that I'm trying to sell before moving. |
|
|
|
Nicholas Ackron
From:
Daytona Beach
|
Posted 15 Aug 2017 7:54 pm
|
|
| I have a Bandit 112 that I'm trying to sell before moving. |
|
|
|
Bob Watson
From:
Champaign, Illinois, U.S.
|
Posted 16 Aug 2017 12:16 am
|
|
| Ken, I have a PX 300 that I believe is the same cab as a Session 1000. It was making some crackling noises the last time I tried to use it. I've thought about having it fixed, but right now its just sitting around and I would consider selling it if you are interested. The cab is in good shape. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 16 Aug 2017 3:37 am
|
|
thanks for the responses. I have a mess of parts ordered from Mouser for the power amp section. If I can get it up and running the PX30 might be a good option. Let me know what to want for it.
Thanks again |
|
|
|
Bill A. Moore
From:
Silver City, New Mexico, USA
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 16 Aug 2017 3:49 pm
|
|
I have the Molex parts and tools for the older style cable. The N112 and N1000 use a four pin Panduit connector
Realized today th baffle is also missing. Still may just fix it up if I can't find a baffle and grill |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 18 Aug 2017 9:50 am
|
|
Got the amp running again. All four MOSFETs on the power board were blown, two mosfet drivers IC chips replaced and two 10 ohm/1/4 watt resistors replaced.
Found the Panduit, 4 pin connectors on eBay. Bought a bag of 88 cheap. Should be able to make a reverb cable assembly now
Got to build a baffle and grill assembly unless I can find a cabinet complete somewhere
Going to check with Peavey parts and see if the have a baffle and grill assembly today.
Still looking for a speaker as well |
|
|
|
Adam Pettis
From:
Appleton, WI
|
Posted 20 Aug 2017 1:51 pm
|
|
Hi Ken,
I've got a cabinet for you!
Adam |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 20 Aug 2017 2:02 pm
|
|
Awesome! I'll pm my phone number if you want to call. Thanks
I'll also pm the email |
|
|
|
